ICOTOM 20 - International Conference on Textures of Materials

8:00 - 9:00 (1h)

Registration

9:00 - 9:30 (30min)

Opening Ceremony

Amphi Lemoigne

L.S. Toth, A.D. Rollett

9:30 - 10:00 (30min)

Plenary Lecture

Amphi Lemoigne

Daniel Chateigner - Chair.: H.G. Brokmeier

10:10 - 10:50 (40min)

Texture and anisotropy

Amphi Lemoigne

Chair.: L. Kestens

› Novel and Unknown Applications of Texture Research - KEYNOTE - Jerzy Szpunar, Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, Canada S7N 5A9 10:10-10:30 (20min)

› Investigating the Anisotropic Effect of Soluble Hydrogen on Plasticity in Low-Symmery Alpha-Uranium - Mary O'Brien, Los Alamos National Laboratory 10:30-10:50 (20min)

10:10 - 10:50 (40min)

Recrystallization and grain growth

Amphi 1 - Fac de Droit

Chair.: A. Borbely

› Al-Mg-Si alloys with high fractions of intermetallic particles - recrystallization and sheet material properties - KEYNOTE - Irmgard Weißensteiner, Montanuniversität Leoben 10:10-10:30 (20min)

› Modelling the effects of texture beta annealing of an alpha-beta Ti alloy - Ha Aiden, School of Materials [Manchester] 10:30-10:50 (20min)

10:10 - 10:50 (40min)

Symposium Ranjit Kumar Ray

Amphi 4 - Fac de Droit

Chair.: N. Gurao

› An experimental study of elasticity in polycrystalline iron - KEYNOTE - Bevis Hutchinson, Swerim AB 10:10-10:30 (20min)

› A CENTURY OF TEXTURE RESEARCH: HISTORICAL PERSPECTIVE AND A PERSONAL JOURNEY - INVITED - Ranjit Ray, formerly at Indian Institute of Technology, Kanpur 10:30-10:50 (20min)

10:10 - 10:50 (40min)

Microstructure

Amphi 2 - Fac de Droit

Chair.: B. Bacroix

› Assessment of EBSD regarding cyclic plasticity: a point a view - KEYNOTE - Jérémie Bouquerel, Unité Matériaux et Transformations - UMR 8207 10:10-10:30 (20min)

› Strain localization phenomena in austenitic FeMnAlC low-density steels: Mechanisms and contribution to plasticity - Ivan Gutierrez, National Institute for Materials Science (NIMS) 10:30-10:50 (20min)

10:50 - 11:20 (30min)

Break

11:20 - 13:00 (1h40)

Texture and anisotropy

Amphi Lemoigne

Chair.: L. Kestens

› Adiabatic shear bands formation in pure titanium - INVITED - Henryk Paul, Institute of Metallurgy and Materials Science Polish Academy of Sciences 11:20-11:40 (20min)

› Location Dependent Texture Development in Ti-6Al-4V Thin Walls during Wire-feed Directed Energy Deposition - Rajib Halder, Carnegie Mellon University [Pittsburgh] 11:40-12:00 (20min)

› Characterization and modelling of anisotropic expanded austenite lattice curvature in plasma nitrocarburized 316L stainless steel - Matthew Bolan, Technishe Universität Bergakademie Freiberg 12:00-12:20 (20min)

› Crystallographic texture development during magnetron sputtering of (Ti,Al)N. - Alex BELLANGER, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux 12:20-12:40 (20min)

› Influence of gradient microstructures on the texture and mechanical response in pure cobalt - Nathan Brown, Washington State University 12:40-13:00 (20min)

11:20 - 13:00 (1h40)

Recrystallization and grain growth

Amphi 1 - Fac de Droit

Chair.: A. Borbely

› Identification of annealed and recrystallized grains from EBSD maps - Application to an IF steel - INVITED - Francis Wagner, Laboratoire d'étude des microstructures et de mécanique des matériaux, (CNRS-UMR 7239) 11:20-11:40 (20min)

› Nucleation mechanisms leading to different recrystallization textures in ferritic ultra-low carbon steels in relation to the prior deformation substructure. - Konstantina Traka, Delft University of Technology 11:40-12:00 (20min)

› Secondary Recrystallization Mechanism in Heavily Cold rolled Grain-Oriented Silicon Steel - Ryo Matsubara, Nippon Steel Corporation 12:00-12:20 (20min)

› Dynamic recrystallization and mechanical behavior of Mg alloy AZ31: Constraints from tensile tests with in-situ EBSD analysis - Andrea Tommasi, Géosciences Montpellier 12:20-12:40 (20min)

› The role of chemical interaction with recrystallization microstructure and texture evolution: Sn alloying in Fe-Si model alloys - Nikolas Mavrikakis, ArcelorMittal Global R&D Gent 12:40-13:00 (20min)

11:20 - 13:00 (1h40)

Symposium Ranjit Kumar Ray

Amphi 4 - Fac de Droit

Chair.: N. Gurao

› Textures of a Few Multi-Phase Advanced high Strength Steels - INVITED - Basudev Bhattacharya, R&D, Tata Steel Limited 11:20-11:40 (20min)

› Texture Evolution during Selective Laser Melting: Experiments and Simulation - Satyam Suwas, Indian Institute of Science, Bangalore 11:40-12:00 (20min)

› Effect of texture on deformation behaviour of titanium in the presence of hydrogen - Shirish Chandrakar, Indian Institute of Technology Kanpur 12:00-12:20 (20min)

› A critical assessment of martensitic variant selection criteria in martensitic steels: statistical evaluation through microtexture evaluation - B Aashranth, Indian Institute of Science, Indira Gandhi Centre for Atomic research, Kalpakkam 12:20-12:40 (20min)

› Design and Development of a Low Density Ti35Zr35Nb15Mo5Fe5Cr5 Complex Concentrated Alloy for Biomedical Application - Subhasis Sinha, Indian Institute of Technology [BHU Varanasi] 12:40-13:00 (20min)

11:20 - 13:00 (1h40)

Microstructure

Amphi 2 - Fac de Droit

Chair.: B. Bacroix

› Engineering Corrosion Resistance in Magnesium Alloys for Biomedical Applications: A synergy of Zn/Ca atomic ratio & texture-based approach - INVITED - Rajashekhara Shabadi, Unité Matériaux et Transformations - UMR 8207 11:20-11:40 (20min)

› Application of Advanced EBSD Methods for Phase Detection in Martensitic Steels - Patrick Callahan, Naval Research Laboratory 11:40-12:00 (20min)

› Direct observation of the influence of grain orientation on the corrosion of steels - Tonye Jack, University of Saskatchewan [Saskatoon] 12:00-12:20 (20min)

› Enhanced understanding of the reconstructed austenite microstructure with EBSD - Ruth Birch, Department of Materials Engineering, University of British Columbia 12:20-12:40 (20min)

› Introducing the reflection Kikuchi diffraction technique (RKD) - Jakub Holzer, Thermo Fisher Scientific 12:40-13:00 (20min)

13:00 - 14:00 (1h)

Lunch

14:00 - 14:30 (30min)

Plenary Lecture

Amphi Lemoigne

Stefan Zaefferer - Chair.: J. Spzunar

14:40 - 15:40 (1h)

Texture and anisotropy

Amphi Lemoigne

Chair.: C. Tomé

› Orientation dependence of static vs. dynamic recovery in Interstitial Free steel deformed in torsion - INVITED - Leo A.I. Kestens, Ghent University, Delft University of Technology 14:40-15:00 (20min)

› Comparison of different texture models in Rietveld analysis of diffraction data - KEYNOTE - Luca Lutterotti, Department of Industrial Engineering, University of Trento, via Sommarive, 9 - 38123 Trento 15:00-15:20 (20min)

› Compact representation of texture for the prediction of macroscopic yield surfaces using machine learning methods - François VILLETTE, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F – 42023 Saint-Etienne, France 15:20-15:40 (20min)

14:40 - 15:40 (1h)

Recrystallization and grain growth

Amphi 1 - Fac de Droit

Chair.: F. Wagner

› Combined in situ texture and microstructure analysis of recrystallizing AlZrSc alloy and AlZrSc-TiB2 nano-composite - KEYNOTE - Andras BORBELY, Ecole des MINES de St-Etienne / Centre SMS / UMR 5307 CNRS 14:40-15:00 (20min)

› 3D grain growth in electrical steel sheet studied by laboratory X-ray diffraction contrast tomography - Masato Yasuda, Technical University of Denmark, Nippon Steel Corporation 15:00-15:20 (20min)

› Recrystallization nucleation mechanism of cold-rolled texture pure Titanium with electric-pulse treatment - Lei Wang, Northeastern University 15:20-15:40 (20min)

14:40 - 15:40 (1h)

Symposium Ranjit Kumar Ray

Amphi 4 - Fac de Droit

Chair.: S. Suwas

› Relating Elastic-Plastic Strain Gradient in Austenite with Martensite Variant selection - KEYNOTE - Indradev Samajdar, Department of metallurgical Engineering and materials science, IIT Bombay 14:40-15:00 (20min)

› Microstructure influence on the bendability of hot rolled martensitic steels - Monika Krugla, Tata Steel Europe, R&D, IJmuiden 15:00-15:20 (20min)

› Microstructure and texture evolution during uniaxial and triaxial compression of a magnesium-cerium alloy - Surajbhan Jaiswal, Department of Materials Science and Engineering, Indian Institute of Technology Delhi, Delhi, 110016, India 15:20-15:40 (20min)

14:40 - 15:40 (1h)

Microstructure

Amphi 2 - Fac de Droit

Chair.: D. Field

› Evading the strength and electrical conductivity trade-off in Cu-Ni-Si alloys by cryogenic rolling and aging - KEYNOTE - Hailong Shi, Harbin Institute of Technology 14:40-15:00 (20min)

› A large-scale heterostructured Cu-Ni-Cr-Si alloy produced by radial shear rolling - Jairo Alberto Munoz Bolanos, Universitat Politècnica de Catalunya = Université polytechnique de Catalogne [Barcelona] 15:00-15:20 (20min)

› Microstructural Characterization of Friction Stir Welded Dual Phase (Al, Zn, Mg)-Fe Hypoeutectic Cast Alloy for Structural Automotive Applications - Manish Borse, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Madras, Chennai, India 15:20-15:40 (20min)

15:40 - 16:10 (30min)

Break

16:10 - 17:10 (1h)

Texture and anisotropy

Amphi Lemoigne

Chair.: C. Tomé

› Evolution of texture and dislocation populations during continuous bending under tension (CBT) processing of titanium - INVITED - David Fullwood, Brigham Young University 16:10-16:30 (20min)

› Nonlinear optimization for compact representation of orientation distributions based on generalized spherical harmonics - Marko Knezevic, Department of Mechanical Engineering, University of New Hampshire 16:30-16:50 (20min)

› The effect of deformation texture and grain boundary character distribution on the low rate deformation in binary zinc alloys - Jakub Kawałko, Academic Centre for Materials and Nanotechnology, AGH University of Krakow 16:50-17:10 (20min)

16:10 - 17:10 (1h)

Recrystallization and grain growth

Amphi 1 - Fac de Droit

Chair.: F. Wagner

› Track-Rex: a universal toolbox for tracking recrystallization nucleation and grain growth behaviors in polycrystalline materials - INVITED - Dikai Guan, School of Engineering, University of Southampton 16:10-16:30 (20min)

› Simulating the effect of heating rates on texture evolution in Aluminium alloys - Vitesh Shah, AMAG rolling GmbH 16:30-16:50 (20min)

› Microstructure and texture formation of AHSS produced via non-conventional technologies - Roumen Petrov, Department of Electrical Energy, Metals, Mechanical constructions & Systems, Ghent University, Department of Materials Science and Engineering, Delft University of Technology 16:50-17:10 (20min)

16:10 - 17:10 (1h)

Symposium Ranjit Kumar Ray

Amphi 4 - Fac de Droit

Chair.: S. Suwas

› Role of grain boundary energy on particle dissolution induced abnormal grain growth - INVITED - Subramanya Sarma Vadlamani, Indian Institute of Technology Madras 16:10-16:30 (20min)

› Developing an integrated modeling framework for capturing orientation dependent precipitation strengthening in Al-Cu-Li alloys - Sumeet Mishra, Indian Institute of Technology Roorkee - Purnima Bharti, Indian Institute of Technology Roorkee - Jyoti Ranjan Sahoo, Indian Institute of Technology Roorkee 16:30-16:50 (20min)

› Texture evolution in aluminum during High Pressure Compressive Reverse Shearing (HPCRS) - Satish Kailas, Indian Institute of Science 16:50-17:10 (20min)

16:10 - 17:10 (1h)

Microstructure

Amphi 2 - Fac de Droit

Chair.: D. Field

› Rotary friction welding of precipitate hardened maraging steel for aerospace and defence applications: Characterisation and finite element modelling - Amborish Banerjee, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK - Laurie da Silva, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK 16:10-16:30 (20min)

› Direct Microtextural Observations, and Molecular Dynamics Simulations, on the Reduction of Iron Ore. - VIKRAM CHAVAN, Department of Metallurigical and Materials science IIT Bombay 16:30-16:50 (20min)

› The Dislocation Behaviour and GND Development in Nickel Based Superalloys during Creep - Soran Birosca, University of Portsmouth 16:50-17:10 (20min)