08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
8:00 - 9:00 (1h)
Registration
Registration
10:10 - 10:50 (40min)
Texture and anisotropy
Amphi Lemoigne
Chair.: L. Kestens
› Novel and Unknown Applications of Texture Research
- KEYNOTE - Jerzy Szpunar, Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, Canada S7N 5A9
10:10-10:30 (20min)
› Investigating the Anisotropic Effect of Soluble Hydrogen on Plasticity in Low-Symmery Alpha-Uranium
- Mary O'Brien, Los Alamos National Laboratory
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: A. Borbely
› Al-Mg-Si alloys with high fractions of intermetallic particles - recrystallization and sheet material properties
- KEYNOTE - Irmgard Weißensteiner, Montanuniversität Leoben
10:10-10:30 (20min)
› Modelling the effects of texture beta annealing of an alpha-beta Ti alloy
- Ha Aiden, School of Materials [Manchester]
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: N. Gurao
› An experimental study of elasticity in polycrystalline iron
- KEYNOTE - Bevis Hutchinson, Swerim AB
10:10-10:30 (20min)
› A CENTURY OF TEXTURE RESEARCH: HISTORICAL PERSPECTIVE AND A PERSONAL JOURNEY
- INVITED - Ranjit Ray, formerly at Indian Institute of Technology, Kanpur
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Microstructure
Amphi 2 - Fac de Droit
Chair.: B. Bacroix
› Assessment of EBSD regarding cyclic plasticity: a point a view
- KEYNOTE - Jérémie Bouquerel, Unité Matériaux et Transformations - UMR 8207
10:10-10:30 (20min)
› Strain localization phenomena in austenitic FeMnAlC low-density steels: Mechanisms and contribution to plasticity
- Ivan Gutierrez, National Institute for Materials Science (NIMS)
10:30-10:50 (20min)
10:50 - 11:20 (30min)
Break
11:20 - 13:00 (1h40)
Texture and anisotropy
Amphi Lemoigne
Chair.: L. Kestens
› Adiabatic shear bands formation in pure titanium
- INVITED - Henryk Paul, Institute of Metallurgy and Materials Science Polish Academy of Sciences
11:20-11:40 (20min)
› Location Dependent Texture Development in Ti-6Al-4V Thin Walls during Wire-feed Directed Energy Deposition
- Rajib Halder, Carnegie Mellon University [Pittsburgh]
11:40-12:00 (20min)
› Characterization and modelling of anisotropic expanded austenite lattice curvature in plasma nitrocarburized 316L stainless steel
- Matthew Bolan, Technishe Universität Bergakademie Freiberg
12:00-12:20 (20min)
› Crystallographic texture development during magnetron sputtering of (Ti,Al)N.
- Alex BELLANGER, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux
12:20-12:40 (20min)
› Influence of gradient microstructures on the texture and mechanical response in pure cobalt
- Nathan Brown, Washington State University
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: A. Borbely
› Identification of annealed and recrystallized grains from EBSD maps - Application to an IF steel
- INVITED - Francis Wagner, Laboratoire d'étude des microstructures et de mécanique des matériaux, (CNRS-UMR 7239)
11:20-11:40 (20min)
› Nucleation mechanisms leading to different recrystallization textures in ferritic ultra-low carbon steels in relation to the prior deformation substructure.
- Konstantina Traka, Delft University of Technology
11:40-12:00 (20min)
› Secondary Recrystallization Mechanism in Heavily Cold rolled Grain-Oriented Silicon Steel
- Ryo Matsubara, Nippon Steel Corporation
12:00-12:20 (20min)
› Dynamic recrystallization and mechanical behavior of Mg alloy AZ31: Constraints from tensile tests with in-situ EBSD analysis
- Andrea Tommasi, Géosciences Montpellier
12:20-12:40 (20min)
› The role of chemical interaction with recrystallization microstructure and texture evolution: Sn alloying in Fe-Si model alloys
- Nikolas Mavrikakis, ArcelorMittal Global R&D Gent
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: N. Gurao
› Textures of a Few Multi-Phase Advanced high Strength Steels
- INVITED - Basudev Bhattacharya, R&D, Tata Steel Limited
11:20-11:40 (20min)
› Texture Evolution during Selective Laser Melting: Experiments and Simulation
- Satyam Suwas, Indian Institute of Science, Bangalore
11:40-12:00 (20min)
› Effect of texture on deformation behaviour of titanium in the presence of hydrogen
- Shirish Chandrakar, Indian Institute of Technology Kanpur
12:00-12:20 (20min)
› A critical assessment of martensitic variant selection criteria in martensitic steels: statistical evaluation through microtexture evaluation
- B Aashranth, Indian Institute of Science, Indira Gandhi Centre for Atomic research, Kalpakkam
12:20-12:40 (20min)
› Design and Development of a Low Density Ti35Zr35Nb15Mo5Fe5Cr5 Complex Concentrated Alloy for Biomedical Application
- Subhasis Sinha, Indian Institute of Technology [BHU Varanasi]
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Microstructure
Amphi 2 - Fac de Droit
Chair.: B. Bacroix
› Engineering Corrosion Resistance in Magnesium Alloys for Biomedical Applications: A synergy of Zn/Ca atomic ratio & texture-based approach
- INVITED - Rajashekhara Shabadi, Unité Matériaux et Transformations - UMR 8207
11:20-11:40 (20min)
› Application of Advanced EBSD Methods for Phase Detection in Martensitic Steels
- Patrick Callahan, Naval Research Laboratory
11:40-12:00 (20min)
› Direct observation of the influence of grain orientation on the corrosion of steels
- Tonye Jack, University of Saskatchewan [Saskatoon]
12:00-12:20 (20min)
› Enhanced understanding of the reconstructed austenite microstructure with EBSD
- Ruth Birch, Department of Materials Engineering, University of British Columbia
12:20-12:40 (20min)
› Introducing the reflection Kikuchi diffraction technique (RKD)
- Jakub Holzer, Thermo Fisher Scientific
12:40-13:00 (20min)
13:00 - 14:00 (1h)
Lunch
14:40 - 15:40 (1h)
Texture and anisotropy
Amphi Lemoigne
Chair.: C. Tomé
› Orientation dependence of static vs. dynamic recovery in Interstitial Free steel deformed in torsion
- INVITED - Leo A.I. Kestens, Ghent University, Delft University of Technology
14:40-15:00 (20min)
› Comparison of different texture models in Rietveld analysis of diffraction data
- KEYNOTE - Luca Lutterotti, Department of Industrial Engineering, University of Trento, via Sommarive, 9 - 38123 Trento
15:00-15:20 (20min)
› Compact representation of texture for the prediction of macroscopic yield surfaces using machine learning methods
- François VILLETTE, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F – 42023 Saint-Etienne, France
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: F. Wagner
› Combined in situ texture and microstructure analysis of recrystallizing AlZrSc alloy and AlZrSc-TiB2 nano-composite
- KEYNOTE - Andras BORBELY, Ecole des MINES de St-Etienne / Centre SMS / UMR 5307 CNRS
14:40-15:00 (20min)
› 3D grain growth in electrical steel sheet studied by laboratory X-ray diffraction contrast tomography
- Masato Yasuda, Technical University of Denmark, Nippon Steel Corporation
15:00-15:20 (20min)
› Recrystallization nucleation mechanism of cold-rolled texture pure Titanium with electric-pulse treatment
- Lei Wang, Northeastern University
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: S. Suwas
› Relating Elastic-Plastic Strain Gradient in Austenite with Martensite Variant selection
- KEYNOTE - Indradev Samajdar, Department of metallurgical Engineering and materials science, IIT Bombay
14:40-15:00 (20min)
› Microstructure influence on the bendability of hot rolled martensitic steels
- Monika Krugla, Tata Steel Europe, R&D, IJmuiden
15:00-15:20 (20min)
› Microstructure and texture evolution during uniaxial and triaxial compression of a magnesium-cerium alloy
- Surajbhan Jaiswal, Department of Materials Science and Engineering, Indian Institute of Technology Delhi, Delhi, 110016, India
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Microstructure
Amphi 2 - Fac de Droit
Chair.: D. Field
› Evading the strength and electrical conductivity trade-off in Cu-Ni-Si alloys by cryogenic rolling and aging
- KEYNOTE - Hailong Shi, Harbin Institute of Technology
14:40-15:00 (20min)
› A large-scale heterostructured Cu-Ni-Cr-Si alloy produced by radial shear rolling
- Jairo Alberto Munoz Bolanos, Universitat Politècnica de Catalunya = Université polytechnique de Catalogne [Barcelona]
15:00-15:20 (20min)
› Microstructural Characterization of Friction Stir Welded Dual Phase (Al, Zn, Mg)-Fe Hypoeutectic Cast Alloy for Structural Automotive Applications
- Manish Borse, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Madras, Chennai, India
15:20-15:40 (20min)
15:40 - 16:10 (30min)
Break
16:10 - 17:10 (1h)
Texture and anisotropy
Amphi Lemoigne
Chair.: C. Tomé
› Evolution of texture and dislocation populations during continuous bending under tension (CBT) processing of titanium
- INVITED - David Fullwood, Brigham Young University
16:10-16:30 (20min)
› Nonlinear optimization for compact representation of orientation distributions based on generalized spherical harmonics
- Marko Knezevic, Department of Mechanical Engineering, University of New Hampshire
16:30-16:50 (20min)
› The effect of deformation texture and grain boundary character distribution on the low rate deformation in binary zinc alloys
- Jakub Kawałko, Academic Centre for Materials and Nanotechnology, AGH University of Krakow
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: F. Wagner
› Track-Rex: a universal toolbox for tracking recrystallization nucleation and grain growth behaviors in polycrystalline materials
- INVITED - Dikai Guan, School of Engineering, University of Southampton
16:10-16:30 (20min)
› Simulating the effect of heating rates on texture evolution in Aluminium alloys
- Vitesh Shah, AMAG rolling GmbH
16:30-16:50 (20min)
› Microstructure and texture formation of AHSS produced via non-conventional technologies
- Roumen Petrov, Department of Electrical Energy, Metals, Mechanical constructions & Systems, Ghent University, Department of Materials Science and Engineering, Delft University of Technology
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: S. Suwas
› Role of grain boundary energy on particle dissolution induced abnormal grain growth
- INVITED - Subramanya Sarma Vadlamani, Indian Institute of Technology Madras
16:10-16:30 (20min)
› Developing an integrated modeling framework for capturing orientation dependent precipitation strengthening in Al-Cu-Li alloys
- Sumeet Mishra, Indian Institute of Technology Roorkee - Purnima Bharti, Indian Institute of Technology Roorkee - Jyoti Ranjan Sahoo, Indian Institute of Technology Roorkee
16:30-16:50 (20min)
› Texture evolution in aluminum during High Pressure Compressive Reverse Shearing (HPCRS)
- Satish Kailas, Indian Institute of Science
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Microstructure
Amphi 2 - Fac de Droit
Chair.: D. Field
› Rotary friction welding of precipitate hardened maraging steel for aerospace and defence applications: Characterisation and finite element modelling
- Amborish Banerjee, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK - Laurie da Silva, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK
16:10-16:30 (20min)
› Direct Microtextural Observations, and Molecular Dynamics Simulations, on the Reduction of Iron Ore.
- VIKRAM CHAVAN, Department of Metallurigical and Materials science IIT Bombay
16:30-16:50 (20min)
› The Dislocation Behaviour and GND Development in Nickel Based Superalloys during Creep
- Soran Birosca, University of Portsmouth
16:50-17:10 (20min)
8:00 - 9:00 (1h)
Registration
Registration
9:40 - 10:40 (1h)
Texture and anisotropy
Amphi Lemoigne
Chair.: J. Sidor
› New insights into the texture development during processing of dual phase titanium alloys
- KEYNOTE - João Quinta da Fonseca, University of Manchester [Manchester]
09:40-10:00 (20min)
› Anisotropic deformation behavior of a commercial purity titanium with a sharp texture
- Chihiro Watanabe, Kanazawa University
10:00-10:20 (20min)
› Texture evolution of Ti-Zr-Nb alloy under high-temperature deformation
- Makoto Hasegawa, Yokohama National University
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Microstructure
Amphi 1 - Fac de Droit
Chair.: R. Bolmaro
› Effects of stacking fault energy on deformation-induced microstructures in austenitic stainless steel sheet
- INVITED - Terry Lowe, Colorado School of Mines
09:40-10:00 (20min)
› Quantitative understanding of microstructure evolution in Mg alloys during shear assisted processing and extrusion with different extrusion rates.
- Swapnil Sawalkar, Washington State University - Pacific Northwest National Lab
10:00-10:20 (20min)
› Metallurgical and crystallographic aspects of the Einstein Telescope design
- Alexey Gervasyev, Ghent University
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: I. Samajdar
› Effect of crystallographic texture on deformation and fracture in commercially pure titanium
- KEYNOTE - Nilesh Gurao, Indian Institute of Technology [Kanpur]
09:40-10:00 (20min)
› Evolution of Micro-texture and Stress under Monotonic Tension in an Additively Manufactured near-α alloy
- Sita Choudhary, Department of Materials Engineering, Indian Institute of Science, Bangalore-560012
10:00-10:20 (20min)
› High Pressure Compressive Reciprocating Shear of pure magnesium
- Sanika Paranjape, Indian Institute of Science, Bangalore
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Numerical methods
Amphi 2 - Fac de Droit
Chair.: M. Knezevic
› A grain boundary migration driving force derived from grain boundary energy anisotropy
- KEYNOTE - Gregory Rohrer, Deapartment of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, 15213
09:40-10:00 (20min)
› A discrete sampling approach to evaluating artifacts in orientation distribution functions reconstructed from sparse pole figures
- Daniel Savage, Los Alamos National Laboratory
10:00-10:20 (20min)
› Orientation dependent grain growth modelling and array programming with APL
- Jesus Galan Lopez, Universiteit Gent = Ghent University, Dyalog Ltd.
10:20-10:40 (20min)
10:40 - 11:10 (30min)
Break
11:10 - 12:30 (1h20)
Texture and anisotropy
Amphi Lemoigne
Chair.: J. Sidor
› Improvement of bending formability of AZX612 magnesium alloy by local texture control
- INVITED - Yusuke Onuki, Tokyo Denki University
11:10-11:30 (20min)
› Integrating texture response into a deep drawing FEM-simulation via viscoplastic self-consistent model
- Johannes Kronsteiner, LKR Ranshofen
11:30-11:50 (20min)
› Application of anisotropic yield functions with axial symmetry
- Tomas Manik, Norwegian University of Science and Technology, Department of Materials Science and Engineering - Holmedal Bjørn, Norwegian University of Science and Technology, Department of Materials Science and Engineering
11:50-12:10 (20min)
› Automatic Texture Analysis Alignment
- William Lenthe, EDAX/Gatan
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Multiphase and composite materials
Amphi 1 - Fac de Droit
Chair.: S. Kailas
› Bulk Ti and Ti6Al4V through Consolidation of Chips by Severe Plastic Deformation Methods
- KEYNOTE - Michael Zehetbauer, University of Vienna, Faculty of Physics, Wien, Austria
11:10-11:30 (20min)
› Strengthening, toughening and micromechanism of laminated composites with HCP metal: an example of Ti/Nb multilayers
- INVITED - Nan Jia, Northeastern University
11:30-11:50 (20min)
› The formability AA1050/AA7050 Al multilayered sheets produced by Accumulative Roll Bonding (ARB) in traditional drawing and in single point incremental forming (IF) processes
- Andrea Kliauga, Universidade Federal de Sao Carlos - UFSCar
11:50-12:10 (20min)
› Strengthening and toughening mechanisms of a GNS/Mg composite with layered structure
- Xiaojun Wang, Harbin Institute of Technology - Yeyang Xiang, Harbin Institute of Technology - Hailong Shi, Harbin Institute of Technology
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: I. Samajdar
› The role of laser scan rotation on the microstructure and texture evolution in a Inconel 718 alloy processed through laser powder bed fusion additive manufacturing
- INVITED - Sankaran Shunmugam, Department of Metallurgical and Materials Engineering, IIT Madras
11:10-11:30 (20min)
› Aluminum-Enhanced Deep Drawability: Insights into Texture and Recrystallization Kinetics in Interstitial Free Steels
- Suhash Ranjan Dey, Indian Institute of Technology [Hyderabad]
11:30-11:50 (20min)
› Microstructure and texture control in few steels processed by severe cold rolling and annealing
- Rajib Saha, Research & Development, Tata Steel - Ranjit K Ray, SRMIST Chennai
11:50-12:10 (20min)
11:10 - 12:30 (1h20)
Numerical methods
Amphi 2 - Fac de Droit
Chair.: M. Knezevic
› Visualization of material textures/fabrics by means of isometric Clifford Torus projections
- INVITED - Marc De Graef, Carnegie Mellon University
11:10-11:30 (20min)
› Fast Computations with Orientation Dependent Properties
- Erik Wünsche, Technische Universität Bergakademie Freiberg
11:30-11:50 (20min)
› Prediction of mechanical properties of metals using machine learning based on distribution of nanoindentation test results
- Yoshiteru Aoyagi, Tohoku University
11:50-12:10 (20min)
› Deep Learning applied to EBSD; State of the art and perspective
- Lionel GERMAIN, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux, Labex DAMAS
12:10-12:30 (20min)
12:30 - 13:00 (30min)
Time to see Posters and Exibitions
13:00 - 14:00 (1h)
Lunch
14:40 - 16:00 (1h20)
Texture and anisotropy
Amphi Lemoigne
Chair.: Y. Onuki
› Anisotropy of mechanical properties in L-PBF nickel samples with <011> fiber texture
- INVITED - Denis Solas, Université Paris-Saclay, CNRS
14:40-15:00 (20min)
› Changes in Microstructure and Mechanical Properties by Deformation-Restricted Forging Followed by Extrusion of AZ80Mg Alloy Rod
- Hiromi Miura, Toyohashi University of Technology
15:00-15:20 (20min)
› “Rare Earth” texture effect on tension-compression yield asymmetry in binary Mg-Gd alloy by D-ECAP
- Cai CHEN, Sino-French Engineer School, Nanjing University of Science and Technology, Nanjing 210094, China
15:20-15:40 (20min)
› Synergistic Effects in Magnesium-Rare-Earth-Zinc Alloys - A Gateway to Informed Alloy Design
- Fatim Zahra Mouhib, Institut für Metallkunde und Metallphysik
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: M. Tatsuya
› Crystallographic principles of plastic deformation in polycrystalline metals
- KEYNOTE - Weimin Mao, Inner Mongolia University of Science and Technology, University of Science and Technology Beijing
14:40-15:00 (20min)
› Investigation of the grain refinement and texture of aluminium alloy processed by Friction-Assisted Lateral Extrusion Process (FALEP)
- INVITED - Máté Szűcs, Institute of Physical Metallurgy, Metal forming and Nanotechnology, University of Miskolc
15:00-15:20 (20min)
› Investigation of the texture development of rolled aluminum alloy sheets during constant heating using in situ EBSD
- Stefan Mitsche, Institute of Electron Microscopy, NAWI Graz, Graz University of Technology, Center for Electron Microscopy
15:20-15:40 (20min)
› Predicting the deformation history and mechanical properties of extruded 6xxx automotive alloys using EBSD texture analysis
- MIAN ZHOU, Brunel University London
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Additive manufacturing
Amphi 4 - Fac de Droit
Chair.: R. Chulist
› Overview of Texture Development in Metals Additive Manufacturing
- KEYNOTE - Rollett Anthony, Carnegie Mellon University
14:40-15:00 (20min)
› Microstructural Modification in IN718 Deposits Using Nanoparticles: Transitioning from Columnar to Equiaxed
- INVITED - Jongbae Jeon, Dong-A University
15:00-15:20 (20min)
› Computationally Efficient Textured Microstructure Prediction in Additive Manufacturing
- Gregory Wong, Carnegie Mellon University [Pittsburgh]
15:20-15:40 (20min)
› Additive Manufacturing Innovations: Microstructure Optimisation for Ultra-High Silicon Electrical Steel Components
- Rasoul Karami, Rasoul Karami, Department of Design, Manufacturing and Engineering Management, Advanced Forming Research Centre, National Manufacturing Institute Scotland
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Characterization
Amphi 1 - Fac de Droit
Chair.: N. Gey
› On the relationship between microstructure and resonant ultrasonic spectroscopy: from single crystals to additively manufactured polycristals
- INVITED - Florian LE BOURDAIS, Université Paris-Saclay, CEA, List
14:40-15:00 (20min)
› Characterization of multiphase systems with lab-based diffraction contrast tomography
- Florian Bachmann, Xnovo Technology Aps
15:00-15:20 (20min)
› Insights on multiphase high-strength steels by coupling electron microscopy and high-speed nanoindentation mapping
- Jai Gautam, Jaiprakash Gautam
15:20-15:40 (20min)
› Understanding the Micromechanics of alpha-Ti Using High Energy X-Ray Diffraction Microscopy
- Rachel Lim, Lawrence Livermore National Laboratory
15:40-16:00 (20min)
16:00 - 18:30 (2h30)
Poster sessions & coffee break
8:00 - 9:00 (1h)
Registration
Registration
9:40 - 10:40 (1h)
Additive manufacturing
Amphi Lemoigne
Chair.: A.D. Rollett
› Effect of scanning strategy on the texture of Fe-3.5%Si electrical steel processed by laser powder bed fusion
- INVITED - Hugo Sandim, University of Sao Paulo (USP)
09:40-10:00 (20min)
› Influence of Printing and Post-Processing Parameters on Microstructure and Texture in Laser Powder Bed Fusion Manufactured Haynes 282
- Nicholas Lamprinakos, Carnegie Mellon University [Pittsburgh]
10:00-10:20 (20min)
› A nanoindentation based investigation of the local deformation mechanism of additively manufactured Ti6242 alloy
- Atasi Ghosh, Indian Institute of Science
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: M. Barnett
› A century of crystallographic texture research - with a special focus on the TU Clausthal-
- KEYNOTE - Heinz-Gunter Brokmeier, Clausthal University of Technology
09:40-10:00 (20min)
› Dominates roles of valence electron concentration and ferromagnetism on precipitation in NiFeGa magnetic shape memory alloys
- Haile YAN, Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Material Science and Engineering, Northeastern University, Shenyang 110819, China
10:00-10:20 (20min)
› Effect of texture on shear banding in ECAP
- Werner Skrotzki, Institute of Solid State and Materials Physics, Dresden University of Technology
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: T. Lowe
› Martensite textures in deformed NiTi: in-situ measurement and modeling
- KEYNOTE - Ludek Heller, Institute of Physics of the Czech Academy of Sciences
09:40-10:00 (20min)
› Coupled Diffraction and Microstructure-Aware Modeling Study of the Microstructure and Strength of Tantalum and BCC Steels During Deformation and Subsequent Recovery
- Don Brown, Los Alamos National Laboratory
10:00-10:20 (20min)
› Efficient texture prediction using Gaussian process surrogate models
- Michael Atkinson, Department of Materials, University of Manchester, UK
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Processes for texture control
Amphi 1 - Fac de Droit
Chair.: M. Zehetbauer
› Oxide dispersion strenghtened rotary swaged copper
- INVITED - Jaromír Kopeček, FZU - Institute of Physics of the CAS
09:40-10:00 (20min)
› Texture, microstructure, and property evolution during warm accumulative roll bonding to produce Ti-Al4Mg nano-metallic-laminates
- Rodney McCabe, Los Alamos National Laboratory
10:00-10:20 (20min)
› Transformation of rolling to basal texture in CP-Ti processed by step cold-rolling plus recrystallization annealing
- Jean-Sébastien Lecomte, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux
10:20-10:40 (20min)
10:40 - 11:10 (30min)
Break
11:10 - 12:30 (1h20)
Additive manufacturing
Amphi Lemoigne
Chair.: A.D. Rollett
› Microstructure and texture evolution of Ni-Mn-Ga magnetic shape memory alloys produced by Laser Powder Bed Fusion
- INVITED - Robert Chulist, Institute of Metallurgy and Materials Science
11:10-11:30 (20min)
› Texture and texture mitigation in the dual phase hypo-eutectic alloy Al0.75CrFeNi2.1 manufactured by laser powder bed fusion
- Ivan Cazic, ACCESS (GERMANY)
11:30-11:50 (20min)
› Insight into the microstructural evolution and mechanical response of laser powder bed fusion H13 steel: Effect of substrate preheating
- Nan KANG, Mechanics surfaces and materials processing
11:50-12:10 (20min)
› Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon
- Kewei Chen, Laboratoire de Mécanique des Solides
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: M. Barnett
› Assessment of Orientation Dependence of Deformation Microstructures in Cold Rolled Duplex Steel: A Study Combining EBSD and Generalized Microstructure Pole Figures
- INVITED - Raul Bolmaro, Instituto de Física Rosario, CONICET-UNR, Bv. 27de febrerro 210 bis, 2000 Rosario
11:10-11:30 (20min)
› Neutron diffraction study of texture and stress evolution in magnesium AZ31 during cycle loading
- Przemysław Kot, CoE NOMATEN, National Institute for Nuclear Research
11:30-11:50 (20min)
› Effect of thermomechanical treatment on fracture toughness of Mg alloys
- Xiaoguang Qiao, Harbin Institute of Technology
11:50-12:10 (20min)
› Crystallographic texture variation in laser beam welded CoCrFeNiMn
- Al-Hamdany Nowfal, Institute of Material and Process Design, Department of Laser Processing and Structural Assessment, Helmholtz-Zentrum Hereon
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: T. Lowe
› Texture evolution during hydrodynamic microparticle penetration: a case of Cu-Cu impact
- INVITED - Ahmed Tiamiyu, University of Calgary
11:10-11:30 (20min)
› Texture formation during thermomechanical processing of biocompatible Mg-Li-Y alloys
- Jan Dittrich, Charles University, Department of Physics of Materials
11:30-11:50 (20min)
› The Relative Importance of Deformation and Phase Transformation on the Macrotexture and Microtexture of Hot Rolled Ti-6Al-4V
- Xiaohan Zeng, School of Natural Sciences, The University of Manchester
11:50-12:10 (20min)
› Dynamic phase transformation driven microstructure and texture development during deformation of Zr-2.5wt.%Nb in α+β phase field
- G Bharat Reddy, Bhabha Atomic Research Centre - Rajeev Kapoor, Bhabha Atomic Research Centre - Apu Sarkar, Bhabha Atomic Research Centre
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Characterization
Amphi 1 - Fac de Droit
Chair.: A. Godfrey
› 3D investigations of reasons for texture changes during recrystallization
- KEYNOTE - Dorte Juul Jensen, Danmarks Tekniske Universitet = Technical University of Denmark
11:10-11:30 (20min)
› Applications of the new fs-laser capability in tri-beam for large volume microscopy
- Ali Gholinia, Henry Royce Institute and Department of Materials, The University of Manchester, Manchester, M13 9PL, UK
11:30-11:50 (20min)
› Advancing multimodal characterization at the nanoscale with the TESCAN TENSOR analytical 4D-STEM
- Rob Hooley, TESCAN GROUP
11:50-12:10 (20min)
› 3D microstructural investigation of texture development of two-phase titanium alloys
- Conghui Liu, The University of Manchester
12:10-12:30 (20min)
12:30 - 13:00 (30min)
Time to see Posters and Exhibitions
13:00 - 14:00 (1h)
Lunch
14:40 - 15:40 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: R. Lebensohn
› Numerical assessment of substructure evolution and kinetics of recrystallization in aluminum alloys
- KEYNOTE - Jurij SIDOR, Savaria Institute of Technology, Faculty of Informatics, ELTE Eötvös Loránd University
14:40-15:00 (20min)
› Analysis of texture and dislocation evolution of pure copper by in situ neutron diffraction and crystal plasticity modeling
- MASATO ITO, Mitsubishi Materials Corporation
15:00-15:20 (20min)
› Evaluation of a clustering algorithm for texture data via viscoplastic self-consistent model
- Alois Ott, Austrian Institute of Technology
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: T. Ungar
› Texture analysis at the neutron strain diffractometer POLDI at PSI
- INVITED - Florencia Malamud, Comisión Nacional de Energía Atómica, Laboratorio Argentino de Haces de Neutrones (LAHN), CONICET, Paul Scherrer Institut
14:40-15:00 (20min)
› Using a high-precison robot for texture and strain determination at Neutron Diffractometer STRESS-SPEC
- Michael Hofmann, Heinz Maier-Leibnitz Zentrum, Technische Universität München
15:00-15:20 (20min)
› POWTEX Neutron Diffractometer at FRM II Garching: Current status and instrument characteristics
- Jens Walter, Geowissenschaftliches Zentrum, Georg-August Universität Göttingen
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: L.S. Toth
› The effect of processing route and parameters on microstructure and texture of ferritic stainless steel
- INVITED - Antti Kaijalainen, Materials and Mechanical Engineering, University of Oulu
14:40-15:00 (20min)
› Investigating the Influence of Temperature and Strain on the Deformation and Cracking Behavior of Y-added Zn-1Al-2.5Mg Extruded Wires
- Khushahal Thool, Sunchon National University
15:00-15:20 (20min)
› CRYSTALLOGRAPHIC TEXTURE EVOLUTION IN THE CRYOGENIC TEMPERATURE- FRICTION STIR PROCESSED AA6XXX ALLOY: EXPERIMENTS AND SIMULATIONS
- Aman Gupta, Sunchon National University
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Characterization
Amphi 1 - Fac de Droit
Chair.: Y. Liu
› Fiber textures revisited
- INVITED - Wolfgang Pantleon, Technical University of Denmark
14:40-15:00 (20min)
› Phase identification and microstructure of CoSn_n intermetallics
- Stefan Martin, TU Bergakademie Freiberg
15:00-15:20 (20min)
› Correlative study of Ni-based superalloys deformation mechanism by in-situ EBSD and HR-DIC
- Zhening Yang, Henry Royce Institute and Department of Materials, The University of Manchester, Manchester, M13 9PL, UK
15:20-15:40 (20min)
15:40 - 16:10 (30min)
Break
16:10 - 17:10 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: R. Schouwenaars
› Mechanistic investigation on Ce addition in tuning recrystallization behavior and mechanical property of Mg alloy
- INVITED - Hucheng Pan, Northeastern University
16:10-16:30 (20min)
› Refining the Identification Methodology for Describing Heterogeneous Fe-Si Materials Using the Viscoplastic Self-Consistent Approach
- Laura Herard, Laboratoire des Sciences des Procédés et des Matériaux
16:30-16:50 (20min)
› Effect of deviation from basal texture on polycristalline simulations of ZnAlMg coatings under multiaxial loading
- Mikel Bengoetxea Aristondo, Centre des Matériaux, CNRS UMR 7633, Evry, BP 87 91003, France
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: T. Ungar
› The ID01 beamline: a strain nanoscope for materials characterisation
- INVITED - Steven Leake, European Synchrotron Radiation Facility [Grenoble]
16:10-16:30 (20min)
› Texturization of α phase in gamma-TiAl alloy by high temperature compression studied by synchrotron radiation diffraction and EBSD
- Weimin Gan, GEMS at MLZ, Helmholtz-Zentrum Hereon, Germany
16:30-16:50 (20min)
› Deformation behavior of Mg-Y-Ni alloys containing LPSO phase during tension and compression through in-situ synchrotron diffraction
- Mingyi ZHENG, Harbin Institute of Technology
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: C. Chen
› Grain Subdivision Behavior Due to Cold Rolling in Ultra-Low Carbon Steel
- INVITED - Tatsuya Morikawa, Kyushu University
16:10-16:30 (20min)
› Orientation dependence of dynamic compared to static recovery in Interstitial Free steel
- Estefania Sepulveda Hernandez, Universiteit Gent = Ghent University, Universidad de Santiago de Chile [Santiago]
16:30-16:50 (20min)
› Texture heterogeneity inside a roll bonded Fe-Al multilaminate subjected to plastic instabilities
- Guillaume Hanon, Institute of Mechanics, Materials and Civil Engineering [Louvain]
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Characterization
Amphi 1 - Fac de Droit
Chair.: D. Juul Jensen
› PyEBSDIndex: A Python module for high precision, and fast indexing of EBSD data
- INVITED - David Rowenhorst, US Naval Research Laboratory
16:10-16:30 (20min)
› New Pattern Matching Workflows for EBSD Data Analysis
- Aimo Winkelmann, AGH University of Science and Technology [Krakow, PL]
16:30-16:50 (20min)
› Exploring The Relative Magnitudes of Diffraction-Based Residual Strain Measurements
- Namit Narasimhan Pai, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay
16:50-17:10 (20min)
8:00 - 9:00 (1h)
Registration
Registration
9:00 - 9:30 (30min)
Amphi Lemoigne
Katharina Marquardt - Chair.: J. Quinta da Fonseca
9:40 - 10:40 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: J. Quinta da Fonseca
› Elucidating the Role of 3D Deformation Twins on the Plasticity of Hexagonal Close-packed Metals
- KEYNOTE - Carlos Tome, Los Alamos National Laboratory
09:40-10:00 (20min)
› Effects of twinning deformation on work hardening behavior in commercially pure titanium
- Genki Tsukamoto, Nippon Steel Corporation
10:00-10:20 (20min)
› Study of twinning behaviour in titanium under different loading paths
- M. Wroński, AGH University of Krakow, Faculty of Physics and Applied Computer Science, al. Mickiewicza 30, 30-059 Krakow
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Characterization
Amphi 1 - Fac de Droit
Chair.: H. Pan
› Dislocation Densities and Slip-Mode Distributions in Different Texture Components of Plastically Deformed hcp Materials
- KEYNOTE - Tamas Ungar, Eotvos University Budapest
09:40-10:00 (20min)
› Analysis of lattice distortions in high-carbon steels using EBSD
- Grzegorz Cios, AGH University of Krakow, Academic Centre of Materials and Nano technology
10:00-10:20 (20min)
› Practical Gains from Forward Model Indexing of EBSD Patterns
- Stuart Wright, EDAX/Gatan
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Surfaces and interfaces
Amphi 4 - Fac de Droit
Chair.: R. McCabe
› Grain growth in thin films – when the third dimension matters
- KEYNOTE - Dana Zöllner, Otto-von-Guericke-University Magdeburg, Faculty of Natural Sciences, Universitätsplatz 2, 39106 Magdeburg
09:40-10:00 (20min)
› Laser powder bed fusion of Fe–Co–Ni–Cu high-entropy alloys guided by computational simulation
- Asker Jarlöv, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A*STAR)
10:00-10:20 (20min)
› Improving Piezoelectric Properties of ZnO Thin Films Deposited via AP-SALD with Texture Enhancement
- Hayri Okcu, Doctoral Candidate
10:20-10:40 (20min)
9:40 - 10:40 (1h)
High Entropy Alloys
Amphi 2 - Fac de Droit
Chair.: W. Skrotzki
› Annealing behavior of a carbon-doped nanocrystalline CoCrFeMnNi alloy
- INVITED - Yulia Ivanisenko, Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT)
09:40-10:00 (20min)
› Investigation of the microstructural evolution and mechanical properties of diffusion welded equiatomic CoCrFeMnNi-based multi-component alloys to 316L stainless steel
- Olushola Bamidele Nenuwa, Ecole Nationale Supérieure des Arts et Metiers Metz, Department of Mineral and Petroleum Resources Engineering, Federal Polytechnic, P.M.B. 5351, Ado-Ekiti, Nigeria
10:00-10:20 (20min)
› Microstructure evolution during hot deformation of newly developed 30Nb5Ta30Ti15V20Zr high entropy alloy
- PRAMOTE THIRATHIPVIWAT, Yokohama National University
10:20-10:40 (20min)
10:40 - 11:10 (30min)
Break
11:10 - 12:30 (1h20)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: J. Quinta da Fonseca
› Improving the continuum theory by crystal plasticity simulations
- INVITED - Bjørn Holmedal, Department of Materials Science and Engineering, Faculty of Natural Sciences, NTNU – Norwegian University of Science and Technology
11:10-11:30 (20min)
› A new flow line approach for modeling the deformation field and texture in FALEP
- Ali Amininejad, University of Miskolc, Institute of Physical Metallurgy, Metal-forming and Nanotechnology
11:30-11:50 (20min)
› Comparison of Full-Field Crystal Plasticity Simulations to Synchrotron Experiments: Detailed Investigation of Mispredictions
- Nikhil Prabhu, Department of Materials Engineering, KU Leuven, Department of Computer Science, KU Leuven
11:50-12:10 (20min)
› Crystal plasticity finite element simulation on Mg-10Gd cylinder bar with texture gradient
- Youngung Jeong, School of Materials Science and Engineering, Changwon National University, Department of Materials Convergence System Engineering, Changwon National University
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Characterization
Amphi 1 - Fac de Droit
Chair.: H. Paul
› Bursts of orientation change at the plastic transition in Mg-4Zn
- INVITED - Matthew Barnett, Deakin University, Geelong, VIC, Australia, Institute for Frontier Materials
11:10-11:30 (20min)
› SEM-based diffraction with compact direct electron detectors - new geometries and new analyses
- Ben Britton, Department of Materials Engineering, University of British Columbia
11:30-11:50 (20min)
› Evaluation of Orientation Dependent Dislocation Density in Cold Rolled Pure Iron Using Neutron Diffraction and EBSD
- Takaaki Tanaka, JFE Steel Corp.
11:50-12:10 (20min)
› In-situ observation of impact tensile deformation depending on sampling direction in heavy rolled fine grain metals by using synchrotron radiation
- Masakazu Kobayashi, Toyohashi University of Technology
12:10-12:30 (20min)
11:10 - 11:50 (40min)
Surfaces and interfaces
Amphi 4 - Fac de Droit
Chair.: H. Sandim
› A study on <211>//ND texture formation of Ni deposits
- KEYNOTE - Liuwen Chang, National Sun Yat-sen University
11:10-11:30 (20min)
› Texture dependence of residual stresses in diffusion bonded titanium to vanadium
- Claire Adams, Washington State University
11:30-11:50 (20min)
11:10 - 12:30 (1h20)
Phase transformations
Amphi 2 - Fac de Droit
Chair.: C. Esling
› Phase transformation and deformation microstrucures in Earth's mantle minerals up to 110 GPa and 2000 K using multigrain X-ray crystallography
- KEYNOTE - Sébastien Merkel, Univ Lille, Unité Matériaux et Transformations
11:10-11:30 (20min)
› Deformation induced phase transformations in γ-TiAl alloy under high-temperature compression.
- MOHAMED KEITA, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux, Helmholtz- Zentrum Hereon
11:30-11:50 (20min)
› Martensitic transformation and magnetostrictive effect of textured MnCoSi-based alloys
- Bo YANG, Northeastern University [Shenyang]
11:50-12:10 (20min)
› A study on microstructure and mechanical properties of Co66.66Cr16.67V16.67 metastable medium-entropy alloy
- LUDA WANG, Northeastern University [Shenyang], University of Lorraine；LEM3
12:10-12:30 (20min)
11:50 - 12:30 (40min)
Grain boundary
Amphi 4 - Fac de Droit
Chair.: K. Marquardt
› Identifying growth twinning of β(In) phase during rotating directional solidification of the β(In)-In2Bi-γ(Sn) eutectic system
- Samira Mohagheghi, Access e. V., 52072, Aachen
11:50-12:10 (20min)
› New MTEX software for characterising interfaces using electron backscatter diffraction: TrueEBSD distortion correction and grain boundary smoothing
- Vivian Tong, National Physical Laboratory [Teddington]
12:10-12:30 (20min)
12:30 - 13:30 (1h)
Lunch and departure for excusion
14:00 - 19:00 (5h)
Excursion
Hackenberg underground military site of the Maginot line, or
UNESCO world heritage Place Stanislas, or
Roman Metz
19:00 - 22:00 (3h)
Banquet
9:40 - 10:40 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: P. Bocher
› Hierarchy of the macrozone features in Ti-6Al-4V alloy inferred from massive FFT-based polycrystal plasticity calculations
- INVITED - Stephane BERBENNI, LEM3 UMR 7239 Université de Lorraine, CNRS, Arts et Metiers ParisTech, France
09:40-10:00 (20min)
› The full constraints Taylor model as a transfer function for texture evolution during plastic deformation
- Rafael Schouwenaars, Departamento de Materiales y Manufactura, Universidad Nacional Autónoma de México, Department of Electromechanical, Systems and Metals Engineering, Ghent university
10:00-10:20 (20min)
9:40 - 10:40 (1h)
Grain boundary
Amphi A - IUT
Chair.: S. Mishra
› Nucleation control of deformation-induced martensitic transformation by microstructure design through atomic simulation
- INVITED - Tomotsugu Shimokawa, Kanazawa University
09:40-10:00 (20min)
› Effects of microstructural internal lengths on the mechanical behavior of a ferritic steel: micromechanical modeling based on a statistical method using EBSD and nanoindentation
- Jean-Marc Pipard, ArcelorMittal Global Research and Development, Maizières-lès-Metz
10:00-10:20 (20min)
› Modeling of grain-boundary mediated viscoplasticity in nanocrystalline Al/a-Al2O3 laminate system
- Saad Mortadi, iMMC-UCLouvain
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Phase transformations
Amphi B - IUT
Chair.: R.K. Ray
› Crystallographic characterization of deformation-induced martensite transformation in ultrafine grained metastable austenitic steel
- INVITED - Yuanhong LIU, Kyoto University
09:40-10:00 (20min)
› The Variant Graph Approach to Parent Grain Reconstruction
- Ralf Hielscher, Technische Universität Bergakademie Freiberg
10:00-10:20 (20min)
› Variant Selection by Double Burgers Orientation Relation in Hexagonal Metals and Its Effects on Transformation Textures
- Toshiro Tomida, Ibaraki University
10:20-10:40 (20min)
10:40 - 11:10 (30min)
Break
11:10 - 11:50 (40min)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: S. Berbenni
› Interaction of mechanical twins across grain boundaries in polycrystalline magnesium
- INVITED - Laurent Delannay, Institute of Mechanics, Materials and Civil Engineering, Université Catholique de Louvain
11:10-11:30 (20min)
› In-Grain Microstructure Evolution during Large Deformation of Multi-Phase steels
- Karo Sedighiani, Tata Steel, R&D, IJmuiden
11:30-11:50 (20min)
11:10 - 11:50 (40min)
Grain boundary
Amphi A - IUT
Chair.: S.S. Vadlamani
› Microstructural Insights into Solute-Driven Grain Growth in Magnesium Alloys
- INVITED - Talal Al-Samman, Institute of Physical Metallurgy and Metal Physics [RWTH Aachen University]
11:10-11:30 (20min)
› Hydrogen-Induced Embrittlement in Dual-Phase Steel
- Sanjay Manda, Department of metallurgical Engineering and materials science, IIT Bombay
11:30-11:50 (20min)
11:10 - 11:50 (40min)
Phase transformations
Amphi B - IUT
Chair.: R.K. Ray
› Analysis of phase transformation induced microtextures in ODS steels: in-situ high-temperature EBSD experiments versus crystallographic reconstructions
- Maissa Fekih, Université de Lorraine, CNRS, Arts et Métiers Paris Tech, LEM3, F-57000 Metz, France
11:10-11:30 (20min)
› Microstructure evolution after single pass laser heat-treatments of steel
- Felipe Castro Cerda, Universidad de Santiago, Department of Metellurgical Engineering
11:30-11:50 (20min)
12:00 - 12:20 (20min)
Closing Ceremony
Amphi Lemoigne
12:20 - 13:20 (1h)
Lunchbox
13:20 - 15:20 (2h)
Tutorial: Line profile analysis for defect structure
Amphi A - IUT
Tamas Ungar
13:20 - 15:20 (2h)
Tutorial: Crystallographic data acquisition
Amphi B - IUT
Marc DeGraef
15:20 - 15:40 (20min)
Break
15:40 - 17:40 (2h)
Tutorial: MAUD - Materials Analysis Using Diffraction
Amphi A - IUT
Luca Lutterotti & Daniel Chateigner
15:40 - 17:40 (2h)
Tutorial: Polycrystal plasticity simulations
Amphi B - IUT
Ricardo Lebensohn
8:00 - 8:55 (55min)
Tutorial: ATEX Texture software
Amphi A - IUT
Jean Jacques Fundenberger & Benoit Beausir
8:00 - 9:50 (1h50)
Tutorial: DAMASK Crystal plasticity software
Amphi B - IUT
Martin Diehl
8:55 - 9:50 (55min)
Tutorial: MTEX - Matlab Toolbox
Amphi A - IUT
Ralf Hielscher
9:50 - 10:10 (20min)
Break
10:10 - 12:00 (1h50)
Tutorial: Crystallographic texture
Amphi A - IUT
Satyam Suwas
10:10 - 12:00 (1h50)
Tutorial: DREAM3D
Amphi B - IUT
Tony Rollett
