|
|
|
Detailed program
 |
‹ Tuesday, July 2, 2024 › |
|
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
|
›8:00 (1h)
8:00 - 9:00 (1h)
Registration
Registration
9:40 - 10:40 (1h)
Texture and anisotropy
 Amphi Lemoigne
Chair.: J. Sidor
› New insights into the texture development during processing of dual phase titanium alloys
- KEYNOTE - João Quinta da Fonseca, University of Manchester [Manchester]
09:40-10:00 (20min)
› Anisotropic deformation behavior of a commercial purity titanium with a sharp texture
- Chihiro Watanabe, Kanazawa University
10:00-10:20 (20min)
› Texture evolution of Ti-Zr-Nb alloy under high-temperature deformation
- Makoto Hasegawa, Yokohama National University
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Microstructure
Amphi 1 - Fac de Droit
Chair.: R. Bolmaro
› Effects of stacking fault energy on deformation-induced microstructures in austenitic stainless steel sheet
- INVITED - Terry Lowe, Colorado School of Mines
09:40-10:00 (20min)
› Quantitative understanding of microstructure evolution in Mg alloys during shear assisted processing and extrusion with different extrusion rates.
- Swapnil Sawalkar, Washington State University - Pacific Northwest National Lab
10:00-10:20 (20min)
› Metallurgical and crystallographic aspects of the Einstein Telescope design
- Alexey Gervasyev, Ghent University
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: I. Samajdar
› Effect of crystallographic texture on deformation and fracture in commercially pure titanium
- KEYNOTE - Nilesh Gurao, Indian Institute of Technology [Kanpur]
09:40-10:00 (20min)
› Evolution of Micro-texture and Stress under Monotonic Tension in an Additively Manufactured near-α alloy
- Sita Choudhary, Department of Materials Engineering, Indian Institute of Science, Bangalore-560012
10:00-10:20 (20min)
› High Pressure Compressive Reciprocating Shear of pure magnesium
- Sanika Paranjape, Indian Institute of Science, Bangalore
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Numerical methods
Amphi 2 - Fac de Droit
Chair.: M. Knezevic
› A grain boundary migration driving force derived from grain boundary energy anisotropy
- KEYNOTE - Gregory Rohrer, Deapartment of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, 15213
09:40-10:00 (20min)
› A discrete sampling approach to evaluating artifacts in orientation distribution functions reconstructed from sparse pole figures
- Daniel Savage, Los Alamos National Laboratory
10:00-10:20 (20min)
› Orientation dependent grain growth modelling and array programming with APL
- Jesus Galan Lopez, Universiteit Gent = Ghent University, Dyalog Ltd.
10:20-10:40 (20min)
›10:40 (30min)
10:40 - 11:10 (30min)
Break
11:10 - 12:30 (1h20)
Texture and anisotropy
Amphi Lemoigne
Chair.: J. Sidor
› Improvement of bending formability of AZX612 magnesium alloy by local texture control
- INVITED - Yusuke Onuki, Tokyo Denki University
11:10-11:30 (20min)
› Integrating texture response into a deep drawing FEM-simulation via viscoplastic self-consistent model
- Johannes Kronsteiner, LKR Ranshofen
11:30-11:50 (20min)
› Application of anisotropic yield functions with axial symmetry
- Tomas Manik, Norwegian University of Science and Technology, Department of Materials Science and Engineering - Holmedal Bjørn, Norwegian University of Science and Technology, Department of Materials Science and Engineering
11:50-12:10 (20min)
11:10 - 12:30 (1h20)
Multiphase and composite materials
Amphi 1 - Fac de Droit
Chair.: S. Kailas
› Bulk Ti and Ti6Al4V through Consolidation of Chips by Severe Plastic Deformation Methods
- KEYNOTE - Michael Zehetbauer, University of Vienna, Faculty of Physics, Wien, Austria
11:10-11:30 (20min)
› Strengthening, toughening and micromechanism of laminated composites with HCP metal: an example of Ti/Nb multilayers
- INVITED - Nan Jia, Northeastern University
11:30-11:50 (20min)
› The formability AA1050/AA7050 Al multilayered sheets produced by Accumulative Roll Bonding (ARB) in traditional drawing and in single point incremental forming (IF) processes
- Andrea Kliauga, Universidade Federal de Sao Carlos - UFSCar
11:50-12:10 (20min)
› Strengthening and toughening mechanisms of a GNS/Mg composite with layered structure
- Xiaojun Wang, Harbin Institute of Technology - Yeyang Xiang, Harbin Institute of Technology - Hailong Shi, Harbin Institute of Technology
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: I. Samajdar
› The role of laser scan rotation on the microstructure and texture evolution in a Inconel 718 alloy processed through laser powder bed fusion additive manufacturing
- INVITED - Sankaran Shunmugam, Department of Metallurgical and Materials Engineering, IIT Madras
11:10-11:30 (20min)
› Aluminum-Enhanced Deep Drawability: Insights into Texture and Recrystallization Kinetics in Interstitial Free Steels
- Suhash Ranjan Dey, Indian Institute of Technology [Hyderabad]
11:30-11:50 (20min)
› Microstructure and texture control in few steels processed by severe cold rolling and annealing
- Rajib Saha, Research & Development, Tata Steel - Ranjit K Ray, SRMIST Chennai
11:50-12:10 (20min)
11:10 - 12:30 (1h20)
Numerical methods
Amphi 2 - Fac de Droit
Chair.: M. Knezevic
› Visualization of material textures/fabrics by means of isometric Clifford Torus projections
- INVITED - Marc De Graef, Carnegie Mellon University
11:10-11:30 (20min)
› Fast Computations with Orientation Dependent Properties
- Erik Wünsche, Technische Universität Bergakademie Freiberg
11:30-11:50 (20min)
› Prediction of mechanical properties of metals using machine learning based on distribution of nanoindentation test results
- Yoshiteru Aoyagi, Tohoku University
11:50-12:10 (20min)
› Deep Learning applied to EBSD; State of the art and perspective
- Lionel GERMAIN, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux, Labex DAMAS
12:10-12:30 (20min)
›12:30 (30min)
12:30 - 13:00 (30min)
Time to see Posters and Exibitions
›13:00 (1h)
13:00 - 14:00 (1h)
Lunch
14:40 - 16:00 (1h20)
Texture and anisotropy
Amphi Lemoigne
Chair.: Y. Onuki
› Anisotropy of mechanical properties in L-PBF nickel samples with <011> fiber texture
- INVITED - Denis Solas, Université Paris-Saclay, CNRS
14:40-15:00 (20min)
› Changes in Microstructure and Mechanical Properties by Deformation-Restricted Forging Followed by Extrusion of AZ80Mg Alloy Rod
- Hiromi Miura, Toyohashi University of Technology
15:00-15:20 (20min)
› “Rare Earth” texture effect on tension-compression yield asymmetry in binary Mg-Gd alloy by D-ECAP
- Cai CHEN, Sino-French Engineer School, Nanjing University of Science and Technology, Nanjing 210094, China
15:20-15:40 (20min)
› Synergistic Effects in Magnesium-Rare-Earth-Zinc Alloys - A Gateway to Informed Alloy Design
- Fatim Zahra Mouhib, Institut für Metallkunde und Metallphysik
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: M. Tatsuya
› Crystallographic principles of plastic deformation in polycrystalline metals
- KEYNOTE - Weimin Mao, Inner Mongolia University of Science and Technology, University of Science and Technology Beijing
14:40-15:00 (20min)
› Investigation of the grain refinement and texture of aluminium alloy processed by Friction-Assisted Lateral Extrusion Process (FALEP)
- INVITED - Máté Szűcs, Institute of Physical Metallurgy, Metal forming and Nanotechnology, University of Miskolc
15:00-15:20 (20min)
› Investigation of the texture development of rolled aluminum alloy sheets during constant heating using in situ EBSD
- Stefan Mitsche, Institute of Electron Microscopy, NAWI Graz, Graz University of Technology, Center for Electron Microscopy
15:20-15:40 (20min)
› Predicting the deformation history and mechanical properties of extruded 6xxx automotive alloys using EBSD texture analysis
- MIAN ZHOU, Brunel University London
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Additive manufacturing
Amphi 4 - Fac de Droit
Chair.: R. Chulist
› Overview of Texture Development in Metals Additive Manufacturing
- KEYNOTE - Rollett Anthony, Carnegie Mellon University
14:40-15:00 (20min)
› Microstructural Modification in IN718 Deposits Using Nanoparticles: Transitioning from Columnar to Equiaxed
- INVITED - Jongbae Jeon, Dong-A University
15:00-15:20 (20min)
› Computationally Efficient Textured Microstructure Prediction in Additive Manufacturing
- Gregory Wong, Carnegie Mellon University [Pittsburgh]
15:20-15:40 (20min)
› Additive Manufacturing Innovations: Microstructure Optimisation for Ultra-High Silicon Electrical Steel Components
- Rasoul Karami, Rasoul Karami, Department of Design, Manufacturing and Engineering Management, Advanced Forming Research Centre, National Manufacturing Institute Scotland
15:40-16:00 (20min)
14:40 - 16:00 (1h20)
Characterization
Amphi 1 - Fac de Droit
Chair.: N. Gey
› On the relationship between microstructure and resonant ultrasonic spectroscopy: from single crystals to additively manufactured polycristals
- INVITED - Florian LE BOURDAIS, Université Paris-Saclay, CEA, List
14:40-15:00 (20min)
› Characterization of multiphase systems with lab-based diffraction contrast tomography
- Florian Bachmann, Xnovo Technology Aps
15:00-15:20 (20min)
› Insights on multiphase high-strength steels by coupling electron microscopy and high-speed nanoindentation mapping
- Jai Gautam, Jaiprakash Gautam
15:20-15:40 (20min)
› Understanding the Micromechanics of alpha-Ti Using High Energy X-Ray Diffraction Microscopy
- Rachel Lim, Lawrence Livermore National Laboratory
15:40-16:00 (20min)
›16:00 (2h30)
16:00 - 18:30 (2h30)
Poster sessions & coffee break
|
| Session | Speech | Logistics | Break | Tour |
| Online user: 6 | Privacy |
|
