Detailed program (under construction)
| Time |
Event |
(+)
|
|
09:00 - 09:30
|
Opening Ceremony - L.S. Toth |
|
|
09:30 - 10:00
|
Plenary Lecture (Room 1) - Daniel Chateinger |
|
|
10:10 - 10:50
|
Texture and anisotropy (Room 1) |
|
|
10:10 - 10:50
|
Recrystallization and grain growth (Room 2) |
|
|
10:10 - 10:50
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
10:10 - 10:50
|
Multiphase and composite materials (Room 4) |
(+)
|
|
10:10 - 10:30 |
› Bulk Ti and Ti6Al4V through Consolidation of Chips by Severe Plastic Deformation Methods - KEYNOTE: Michael Zehetbauer, University of Vienna, Faculty of Physics, Wien, Austria |
|
|
10:30 - 10:50 |
› Micromechanical behavior of multilayered Ti/Nb composites revealed by high-energy diffraction techniques - Nan Jia, Northeastern University |
|
|
10:50 - 11:20
|
Break |
|
|
11:20 - 13:00
|
Texture and anisotropy (Room 1) |
|
|
11:20 - 13:00
|
Recrystallization and grain growth (Room 2) |
|
|
11:20 - 12:20
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
11:20 - 12:20
|
Multiphase and composite materials (Room 4) |
(+)
|
|
11:20 - 11:40 |
› Strengthening and toughening mechanisms of a GNS/Mg composite with layered structure - INVITED: Xiaojun Wang, Harbin Institute of Technology - Yeyang Xiang, Harbin Institute of Technology - Hailong Shi, Harbin Institute of Technology |
|
|
11:40 - 12:00 |
› The formability AA1050/AA7050 Al multilayered sheets produced by Accumulative Roll Bonding (ARB) in traditional drawing and in single point incremental forming (IF) processes - Andrea Kliauga, Universidade Federal de Sao Carlos - UFSCar |
|
|
12:20 - 13:20
|
Lunch |
|
|
12:20 - 13:20
|
Lunch |
|
|
13:00 - 14:00
|
Lunch |
|
|
13:00 - 14:00
|
Lunch |
|
|
13:20 - 14:00
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
13:20 - 14:00
|
Microstructure (Room 4) |
|
|
14:00 - 14:30
|
Plenary Lecture (Room 1) - Stefan Zaefferer |
|
|
14:30 - 15:50
|
Texture and anisotropy (Room 1) |
|
|
14:30 - 15:50
|
Recrystallization and grain growth (Room 2) |
|
|
14:30 - 15:50
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
14:30 - 15:50
|
Microstructure (Room 4) |
|
|
15:50 - 16:20
|
Break |
|
|
16:20 - 18:00
|
Texture and anisotropy (Room 1) |
|
|
16:20 - 18:00
|
Recrystallization and grain growth (Room 2) |
|
|
16:20 - 18:00
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
16:20 - 18:00
|
Microstructure (Room 4) |
|
| Time |
Event |
(+)
|
|
09:00 - 09:30
|
Plenary Lecture (Room 1) - Andy Godfrey |
|
|
09:40 - 10:40
|
Texture and anisotropy (Room 1) |
|
|
09:40 - 10:40
|
Microstructure (Room 2) |
|
|
09:40 - 10:40
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
09:40 - 10:40
|
Numerical methods (Room 4) |
|
|
10:40 - 11:10
|
Break |
|
|
11:10 - 12:50
|
Texture and anisotropy (Room 1) |
|
|
11:10 - 12:50
|
Microstructure (Room 2) |
|
|
11:10 - 12:10
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
11:10 - 12:10
|
Numerical methods (Room 4) |
|
|
12:10 - 13:10
|
Lunch |
|
|
12:10 - 13:10
|
Lunch |
|
|
12:50 - 13:50
|
Lunch |
|
|
12:50 - 13:50
|
Lunch |
|
|
13:10 - 13:50
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
13:10 - 13:50
|
Numerical methods (Room 4) |
|
|
13:50 - 14:20
|
Plenary lecture - David Field |
|
|
14:30 - 16:20
|
Texture and anisotropy (Room 1) |
|
|
14:30 - 16:20
|
Processes for texture control (Room 2) |
|
|
14:30 - 14:50
|
Symposium Ranjit Kumar Ray (Room 3) |
|
|
14:30 - 16:20
|
Deformation textures (Room 4) |
|
|
14:50 - 16:20
|
Additive manufacturing (Room 3) |
|
|
16:20 - 18:30
|
Poster sessions |
|
| Time |
Event |
(+)
|
|
09:00 - 09:30
|
Plenary lecture - Romain Quey |
|
|
09:40 - 10:40
|
Texture and anisotropy (Room 1) |
|
|
09:40 - 10:40
|
Additive manufacturing (Room 2) |
|
|
09:40 - 10:40
|
Symposium Heinz-Günter Brokmeier (Room 3) |
|
|
09:40 - 10:40
|
Deformation textures (Room 4) |
|
|
10:40 - 11:10
|
Break |
|
|
11:10 - 12:50
|
Texture and anisotropy (Room 1) |
|
|
11:10 - 12:50
|
Additive manufacturing (Room 2) |
|
|
11:10 - 12:10
|
Symposium Heinz-Günter Brokmeier (Room 3) |
|
|
11:10 - 12:10
|
Deformation textures (Room 4) |
|
|
12:10 - 13:10
|
Lunch |
|
|
12:10 - 13:10
|
Lunch |
|
|
12:50 - 13:50
|
Lunch |
|
|
12:50 - 13:50
|
Lunch |
|
|
13:10 - 13:50
|
Symposium Heinz-Günter Brokmeier (Room 3) |
|
|
13:10 - 13:50
|
Deformation textures (Room 4) |
|
|
13:50 - 14:20
|
Plenary lecture (Room 1) - Ricardo Lebensohn |
|
|
14:30 - 15:10
|
Polycrystal modeling (Room 1) |
(+)
|
|
14:30 - 14:50 |
› Hierarchy of the macrozone features in Ti-6Al-4V alloy inferred from massive FFT-based polycrystal plasticity calculations - INVITED: Stephane BERBENNI, LEM3 UMR 7239 Université de Lorraine, CNRS, Arts et Metiers ParisTech, France |
|
|
14:50 - 15:10 |
› Numerical assessment of substructure evolution and kinetics of recrystallization in aluminum alloys - Jurij SIDOR, Savaria Institute of Technology, Faculty of Informatics, ELTE Eötvös Loránd University |
|
|
14:30 - 15:50
|
Characterization (Room 2) |
|
|
14:30 - 15:50
|
Symposium Heinz-Günter Brokmeier (Room 3) |
|
|
14:30 - 15:50
|
Deformation textures (Room 4) |
|
|
15:10 - 15:50
|
Crystal plasticity (Room 1) |
|
|
15:50 - 16:20
|
Break |
|
|
16:20 - 17:20
|
Crystal plasticity (Room 1) |
|
|
16:20 - 17:20
|
Characterization (Room 2) |
|
|
16:20 - 17:20
|
Symposium Heinz-Günter Brokmeier (Room 3) |
|
|
16:20 - 17:20
|
Deformation textures (Room 4) |
|
| Time |
Event |
(+)
|
|
09:00 - 09:30
|
Plenary lecture (Room 1) - Katharina Marquardt |
|
|
09:40 - 10:40
|
Crystal plasticity (Room 1) |
|
|
09:40 - 10:40
|
Characterization (Room 2) |
|
|
09:40 - 10:40
|
Surfaces and interfaces (Room 3) |
(+)
|
|
09:40 - 10:00 |
› Grain growth in thin films – when the third dimension matters - KEYNOTE: Dana Zöllner, Otto-von-Guericke-University Magdeburg, Faculty of Natural Sciences, Universitätsplatz 2, 39106 Magdeburg |
|
|
10:00 - 10:20 |
› Laser powder bed fusion of Fe–Co–Ni–Cu high-entropy alloys guided by computational simulation - Asker Jarlöv, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A*STAR) |
|
|
10:20 - 10:40 |
› Improving Piezoelectric Properties of ZnO Thin Films Deposited via AP-SALD with Texture Enhancement - Hayri Okcu, Doctoral Candidate |
|
|
09:40 - 10:20
|
Deformation textures (Room 4) |
|
|
10:20 - 10:40
|
High Entropy Alloys (Room 4) |
(+)
|
|
10:20 - 10:40 |
› Annealing behavior of a carbon-doped nanocrystalline CoCrFeMnNi alloy - Yulia Ivanisenko, Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT) |
|
|
10:40 - 11:10
|
Break |
|
|
11:10 - 12:50
|
Crystal plasticity (Room 1) |
|
|
11:10 - 12:50
|
Characterization (Room 2) |
|
|
11:10 - 12:10
|
Surfaces and interfaces (Room 3) |
(+)
|
|
11:10 - 11:30 |
› Novel insights on the micro-texture formation in additive manufacturing of Ti-6Al-4V alloy - INVITED: Shibayan Roy, Indian Institute of Technology Kharagpur |
|
|
11:10 - 12:10
|
High Entropy Alloys (Room 4) |
(+)
|
|
11:10 - 11:30 |
› Microstructure evolution during hot deformation of newly developed 30Nb5Ta30Ti15V20Zr high entropy alloy - INVITED: PRAMOTE THIRATHIPVIWAT, Yokohama National University |
|
|
11:30 - 11:50 |
› Investigation of the microstructural evolution and mechanical properties of diffusion welded equiatomic CoCrFeMnNi-based multi-component alloys to 316L stainless steel - Olushola Bamidele Nenuwa, Ecole Nationale Supérieure des Arts et Metiers Metz, Department of Mineral and Petroleum Resources Engineering, Federal Polytechnic, P.M.B. 5351, Ado-Ekiti, Nigeria |
|
|
11:50 - 12:10 |
› Microstructural evolution, texture and mechanical properties of cold-rolled CoCrFeNi medium-entropy alloy during different annealing treatments - Konstantin V. Werner, Department of Civil and Mechanical Engineering, Technical University of Denmark |
|
|
12:10 - 12:50
|
Grain boundary (Room 3) |
|
|
12:10 - 12:50
|
Phase transformations (Room 4) |
(+)
|
|
12:10 - 12:30 |
› A study on microstructure and mechanical properties of Co66.66Cr16.67V16.67 metastable medium-entropy alloy - LUDA WANG, Northeastern University [Shenyang], University of Lorraine；LEM3 |
|
|
12:30 - 12:50 |
› Martensitic transformation and magnetostrictive effect of textured MnCoSi-based alloys - Bo YANG, Northeastern University [Shenyang] |
|
|
12:50 - 14:00
|
Lunchbox and departure for excusion |
|
|
14:00 - 19:00
|
Excursion - Hackenberg underground military site of the Maginot line, or
UNESCO world heritage Place Stanislas, or
Roman Metz
|
|
|
19:00 - 22:00
|
Banquet |
|
| Time |
Event |
(+)
|
|
09:00 - 09:30
|
Plenary lecture (Room 1) - Nobuhiro Tsuji |
|
|
09:40 - 10:40
|
Crystal plasticity (Room 1) |
|
|
09:40 - 10:40
|
Characterization (Room 2) |
|
|
09:40 - 10:40
|
Grain boundary (Room 3) |
|
|
09:40 - 10:40
|
Phase transformations (Room 4) |
|
|
10:40 - 11:10
|
Break |
|
|
11:10 - 12:30
|
Crystal plasticity (Room 1) |
|
|
11:10 - 12:30
|
Characterization (Room 2) |
|
|
11:10 - 12:30
|
Grain boundary (Room 3) |
|
|
11:10 - 12:30
|
Phase transformations (Room 4) |
|
|
12:30 - 12:50
|
Closing Ceremony (Room 1) |
|
|
12:50 - 13:50
|
Lunch |
|
|
13:50 - 15:40
|
Tutorial: Line profile analysis for defect structure - Tamas UNGAR |
|
|
13:50 - 15:40
|
Tutorial: Crystallographic data acquisition - Marc DeGraef |
|
|
15:40 - 16:00
|
Break |
|
|
16:00 - 17:50
|
Tutorial: MAUD - Materials Analysis Using Diffraction - Luca Lutterotti & Daniel Chateigner |
|
|
16:00 - 17:50
|
Tutorial: Polycrystal plasticitysimulations - Ricardo Lebensohn |
|
| Time |
Event |
(+)
|
|
08:00 - 08:55
|
Tutorial: ATEX Texture software - Jean Jacques Fundenberger & Benoit Beausir |
|
|
08:00 - 09:50
|
Tutorial: DAMASK Crystal plasticity software - Martin Diehl |
|
|
08:55 - 09:50
|
Tutorial: MTEX - Matlab Toolbox - Ralf Hielscher |
|
|
09:50 - 10:10
|
Break |
|
|
10:10 - 12:00
|
Tutorial: Crystallographic texture - Satyam Suwas |
|
|
10:10 - 12:00
|
Tutorial: DREAM3D - Tony Rollett |
|
|
Loading...