|
|
‹ Monday, July 1, 2024 › | |
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
|
›8:00 (1h)
8:00 - 9:00 (1h)
Registration
Registration
10:10 - 10:50 (40min)
Texture and anisotropy
Amphi Lemoigne
Chair.: L. Kestens
› Novel and Unknown Applications of Texture Research
- KEYNOTE - Jerzy Szpunar, Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, Canada S7N 5A9
10:10-10:30 (20min)
› Investigating the Anisotropic Effect of Soluble Hydrogen on Plasticity in Low-Symmery Alpha-Uranium
- Mary O'Brien, Los Alamos National Laboratory
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: A. Borbely
› Al-Mg-Si alloys with high fractions of intermetallic particles - recrystallization and sheet material properties
- KEYNOTE - Irmgard Weißensteiner, Montanuniversität Leoben
10:10-10:30 (20min)
› Modelling the effects of texture beta annealing of an alpha-beta Ti alloy
- Ha Aiden, School of Materials [Manchester]
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: N. Gurao
› An experimental study of elasticity in polycrystalline iron
- KEYNOTE - Bevis Hutchinson, Swerim AB
10:10-10:30 (20min)
› A CENTURY OF TEXTURE RESEARCH: HISTORICAL PERSPECTIVE AND A PERSONAL JOURNEY
- INVITED - Ranjit Ray, formerly at Indian Institute of Technology, Kanpur
10:30-10:50 (20min)
10:10 - 10:50 (40min)
Microstructure
Amphi 2 - Fac de Droit
Chair.: B. Bacroix
› Assessment of EBSD regarding cyclic plasticity: a point a view
- KEYNOTE - Jérémie Bouquerel, Unité Matériaux et Transformations - UMR 8207
10:10-10:30 (20min)
› Strain localization phenomena in austenitic FeMnAlC low-density steels: Mechanisms and contribution to plasticity
- Ivan Gutierrez, National Institute for Materials Science (NIMS)
10:30-10:50 (20min)
›10:50 (30min)
10:50 - 11:20 (30min)
Break
11:20 - 13:00 (1h40)
Texture and anisotropy
Amphi Lemoigne
Chair.: L. Kestens
› Adiabatic shear bands formation in pure titanium
- INVITED - Henryk Paul, Institute of Metallurgy and Materials Science Polish Academy of Sciences
11:20-11:40 (20min)
› Location Dependent Texture Development in Ti-6Al-4V Thin Walls during Wire-feed Directed Energy Deposition
- Rajib Halder, Carnegie Mellon University [Pittsburgh]
11:40-12:00 (20min)
› Characterization and modelling of anisotropic expanded austenite lattice curvature in plasma nitrocarburized 316L stainless steel
- Matthew Bolan, Technishe Universität Bergakademie Freiberg
12:00-12:20 (20min)
› Crystallographic texture development during magnetron sputtering of (Ti,Al)N.
- Alex BELLANGER, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux
12:20-12:40 (20min)
› Influence of gradient microstructures on the texture and mechanical response in pure cobalt
- Nathan Brown, Washington State University
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: A. Borbely
› Identification of annealed and recrystallized grains from EBSD maps - Application to an IF steel
- INVITED - Francis Wagner, Laboratoire d'étude des microstructures et de mécanique des matériaux, (CNRS-UMR 7239)
11:20-11:40 (20min)
› Nucleation mechanisms leading to different recrystallization textures in ferritic ultra-low carbon steels in relation to the prior deformation substructure.
- Konstantina Traka, Delft University of Technology
11:40-12:00 (20min)
› Secondary Recrystallization Mechanism in Heavily Cold rolled Grain-Oriented Silicon Steel
- Ryo Matsubara, Nippon Steel Corporation
12:00-12:20 (20min)
› Dynamic recrystallization and mechanical behavior of Mg alloy AZ31: Constraints from tensile tests with in-situ EBSD analysis
- Andrea Tommasi, Géosciences Montpellier
12:20-12:40 (20min)
› The role of chemical interaction with recrystallization microstructure and texture evolution: Sn alloying in Fe-Si model alloys
- Nikolas Mavrikakis, ArcelorMittal Global R&D Gent
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: N. Gurao
› Textures of a Few Multi-Phase Advanced high Strength Steels
- INVITED - Basudev Bhattacharya, R&D, Tata Steel Limited
11:20-11:40 (20min)
› Texture Evolution during Selective Laser Melting: Experiments and Simulation
- Satyam Suwas, Indian Institute of Science, Bangalore
11:40-12:00 (20min)
› Effect of texture on deformation behaviour of titanium in the presence of hydrogen
- Shirish Chandrakar, Indian Institute of Technology Kanpur
12:00-12:20 (20min)
› A critical assessment of martensitic variant selection criteria in martensitic steels: statistical evaluation through microtexture evaluation
- B Aashranth, Indian Institute of Science, Indira Gandhi Centre for Atomic research, Kalpakkam
12:20-12:40 (20min)
› Design and Development of a Low Density Ti35Zr35Nb15Mo5Fe5Cr5 Complex Concentrated Alloy for Biomedical Application
- Subhasis Sinha, Indian Institute of Technology [BHU Varanasi]
12:40-13:00 (20min)
11:20 - 13:00 (1h40)
Microstructure
Amphi 2 - Fac de Droit
Chair.: B. Bacroix
› Engineering Corrosion Resistance in Magnesium Alloys for Biomedical Applications: A synergy of Zn/Ca atomic ratio & texture-based approach
- INVITED - Rajashekhara Shabadi, Unité Matériaux et Transformations - UMR 8207
11:20-11:40 (20min)
› Application of Advanced EBSD Methods for Phase Detection in Martensitic Steels
- Patrick Callahan, Naval Research Laboratory
11:40-12:00 (20min)
› Direct observation of the influence of grain orientation on the corrosion of steels
- Tonye Jack, University of Saskatchewan [Saskatoon]
12:00-12:20 (20min)
› Enhanced understanding of the reconstructed austenite microstructure with EBSD
- Ruth Birch, Department of Materials Engineering, University of British Columbia
12:20-12:40 (20min)
› Introducing the reflection Kikuchi diffraction technique (RKD)
- Jakub Holzer, Thermo Fisher Scientific
12:40-13:00 (20min)
›13:00 (1h)
13:00 - 14:00 (1h)
Lunch
14:40 - 15:40 (1h)
Texture and anisotropy
Amphi Lemoigne
Chair.: C. Tomé
› Orientation dependence of static vs. dynamic recovery in Interstitial Free steel deformed in torsion
- INVITED - Leo A.I. Kestens, Ghent University, Delft University of Technology
14:40-15:00 (20min)
› Comparison of different texture models in Rietveld analysis of diffraction data
- KEYNOTE - Luca Lutterotti, Department of Industrial Engineering, University of Trento, via Sommarive, 9 - 38123 Trento
15:00-15:20 (20min)
› Compact representation of texture for the prediction of macroscopic yield surfaces using machine learning methods
- François VILLETTE, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F – 42023 Saint-Etienne, France
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: F. Wagner
› Combined in situ texture and microstructure analysis of recrystallizing AlZrSc alloy and AlZrSc-TiB2 nano-composite
- KEYNOTE - Andras BORBELY, Ecole des MINES de St-Etienne / Centre SMS / UMR 5307 CNRS
14:40-15:00 (20min)
› 3D grain growth in electrical steel sheet studied by laboratory X-ray diffraction contrast tomography
- Masato Yasuda, Technical University of Denmark, Nippon Steel Corporation
15:00-15:20 (20min)
› Recrystallization nucleation mechanism of cold-rolled texture pure Titanium with electric-pulse treatment
- Lei Wang, Northeastern University
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: S. Suwas
› Relating Elastic-Plastic Strain Gradient in Austenite with Martensite Variant selection
- KEYNOTE - Indradev Samajdar, Department of metallurgical Engineering and materials science, IIT Bombay
14:40-15:00 (20min)
› Microstructure influence on the bendability of hot rolled martensitic steels
- Monika Krugla, Tata Steel Europe, R&D, IJmuiden
15:00-15:20 (20min)
› Microstructure and texture evolution during uniaxial and triaxial compression of a magnesium-cerium alloy
- Surajbhan Jaiswal, Department of Materials Science and Engineering, Indian Institute of Technology Delhi, Delhi, 110016, India
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Microstructure
Amphi 2 - Fac de Droit
Chair.: D. Field
› Evading the strength and electrical conductivity trade-off in Cu-Ni-Si alloys by cryogenic rolling and aging
- KEYNOTE - Hailong Shi, Harbin Institute of Technology
14:40-15:00 (20min)
› A large-scale heterostructured Cu-Ni-Cr-Si alloy produced by radial shear rolling
- Jairo Alberto Munoz Bolanos, Universitat Politècnica de Catalunya = Université polytechnique de Catalogne [Barcelona]
15:00-15:20 (20min)
› Microstructural Characterization of Friction Stir Welded Dual Phase (Al, Zn, Mg)-Fe Hypoeutectic Cast Alloy for Structural Automotive Applications
- Manish Borse, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Madras, Chennai, India
15:20-15:40 (20min)
›15:40 (30min)
15:40 - 16:10 (30min)
Break
16:10 - 17:10 (1h)
Texture and anisotropy
Amphi Lemoigne
Chair.: C. Tomé
› Evolution of texture and dislocation populations during continuous bending under tension (CBT) processing of titanium
- INVITED - David Fullwood, Brigham Young University
16:10-16:30 (20min)
› Nonlinear optimization for compact representation of orientation distributions based on generalized spherical harmonics
- Marko Knezevic, Department of Mechanical Engineering, University of New Hampshire
16:30-16:50 (20min)
› The effect of deformation texture and grain boundary character distribution on the low rate deformation in binary zinc alloys
- Jakub Kawałko, Academic Centre for Materials and Nanotechnology, AGH University of Krakow
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Recrystallization and grain growth
Amphi 1 - Fac de Droit
Chair.: F. Wagner
› Track-Rex: a universal toolbox for tracking recrystallization nucleation and grain growth behaviors in polycrystalline materials
- INVITED - Dikai Guan, School of Engineering, University of Southampton
16:10-16:30 (20min)
› Simulating the effect of heating rates on texture evolution in Aluminium alloys
- Vitesh Shah, AMAG rolling GmbH
16:30-16:50 (20min)
› Microstructure and texture formation of AHSS produced via non-conventional technologies
- Roumen Petrov, Department of Electrical Energy, Metals, Mechanical constructions & Systems, Ghent University, Department of Materials Science and Engineering, Delft University of Technology
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Symposium Ranjit Kumar Ray
Amphi 4 - Fac de Droit
Chair.: S. Suwas
› Role of grain boundary energy on particle dissolution induced abnormal grain growth
- INVITED - Subramanya Sarma Vadlamani, Indian Institute of Technology Madras
16:10-16:30 (20min)
› Developing an integrated modeling framework for capturing orientation dependent precipitation strengthening in Al-Cu-Li alloys
- Sumeet Mishra, Indian Institute of Technology Roorkee - Purnima Bharti, Indian Institute of Technology Roorkee - Jyoti Ranjan Sahoo, Indian Institute of Technology Roorkee
16:30-16:50 (20min)
› Texture evolution in aluminum during High Pressure Compressive Reverse Shearing (HPCRS)
- Satish Kailas, Indian Institute of Science
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Microstructure
Amphi 2 - Fac de Droit
Chair.: D. Field
› Rotary friction welding of precipitate hardened maraging steel for aerospace and defence applications: Characterisation and finite element modelling
- Amborish Banerjee, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK - Laurie da Silva, Advanced Forming Research Centre (AFRC), University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire, PA4 9LJ, UK
16:10-16:30 (20min)
› Direct Microtextural Observations, and Molecular Dynamics Simulations, on the Reduction of Iron Ore.
- VIKRAM CHAVAN, Department of Metallurigical and Materials science IIT Bombay
16:30-16:50 (20min)
› The Dislocation Behaviour and GND Development in Nickel Based Superalloys during Creep
- Soran Birosca, University of Portsmouth
16:50-17:10 (20min)
|
Session | Speech | Logistics | Break | Tour |
Online user: 7 | Privacy |