|
|
|
Detailed program
 |
‹ Wednesday, July 3, 2024 › |
|
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
|
›8:00 (1h)
8:00 - 9:00 (1h)
Registration
Registration
9:40 - 10:40 (1h)
Additive manufacturing
 Amphi Lemoigne
Chair.: A.D. Rollett
› Effect of scanning strategy on the texture of Fe-3.5%Si electrical steel processed by laser powder bed fusion
- INVITED - Hugo Sandim, University of Sao Paulo (USP)
09:40-10:00 (20min)
› Influence of Printing and Post-Processing Parameters on Microstructure and Texture in Laser Powder Bed Fusion Manufactured Haynes 282
- Nicholas Lamprinakos, Carnegie Mellon University [Pittsburgh]
10:00-10:20 (20min)
› A nanoindentation based investigation of the local deformation mechanism of additively manufactured Ti6242 alloy
- Atasi Ghosh, Indian Institute of Science
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: M. Barnett
› A century of crystallographic texture research - with a special focus on the TU Clausthal-
- KEYNOTE - Heinz-Gunter Brokmeier, Clausthal University of Technology
09:40-10:00 (20min)
› Dominates roles of valence electron concentration and ferromagnetism on precipitation in NiFeGa magnetic shape memory alloys
- Haile YAN, Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Material Science and Engineering, Northeastern University, Shenyang 110819, China
10:00-10:20 (20min)
› Effect of texture on shear banding in ECAP
- Werner Skrotzki, Institute of Solid State and Materials Physics, Dresden University of Technology
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: T. Lowe
› Martensite textures in deformed NiTi: in-situ measurement and modeling
- KEYNOTE - Ludek Heller, Institute of Physics of the Czech Academy of Sciences
09:40-10:00 (20min)
› Coupled Diffraction and Microstructure-Aware Modeling Study of the Microstructure and Strength of Tantalum and BCC Steels During Deformation and Subsequent Recovery
- Don Brown, Los Alamos National Laboratory
10:00-10:20 (20min)
› Efficient texture prediction using Gaussian process surrogate models
- Michael Atkinson, Department of Materials, University of Manchester, UK
10:20-10:40 (20min)
9:40 - 10:40 (1h)
Processes for texture control
Amphi 1 - Fac de Droit
Chair.: M. Zehetbauer
› Oxide dispersion strenghtened rotary swaged copper
- INVITED - Jaromír Kopeček, FZU - Institute of Physics of the CAS
09:40-10:00 (20min)
› Texture, microstructure, and property evolution during warm accumulative roll bonding to produce Ti-Al4Mg nano-metallic-laminates
- Rodney McCabe, Los Alamos National Laboratory
10:00-10:20 (20min)
› Transformation of rolling to basal texture in CP-Ti processed by step cold-rolling plus recrystallization annealing
- Jean-Sébastien Lecomte, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux
10:20-10:40 (20min)
›10:40 (30min)
10:40 - 11:10 (30min)
Break
11:10 - 12:30 (1h20)
Additive manufacturing
Amphi Lemoigne
Chair.: A.D. Rollett
› Microstructure and texture evolution of Ni-Mn-Ga magnetic shape memory alloys produced by Laser Powder Bed Fusion
- INVITED - Robert Chulist, Institute of Metallurgy and Materials Science
11:10-11:30 (20min)
› Texture and texture mitigation in the dual phase hypo-eutectic alloy Al0.75CrFeNi2.1 manufactured by laser powder bed fusion
- Ivan Cazic, ACCESS (GERMANY)
11:30-11:50 (20min)
› Insight into the microstructural evolution and mechanical response of laser powder bed fusion H13 steel: Effect of substrate preheating
- Nan KANG, Mechanics surfaces and materials processing
11:50-12:10 (20min)
› Icosahedral short-range order mediated twin formation in laser direct energy deposited 316L stainless steel with silicon
- Kewei Chen, Laboratoire de Mécanique des Solides
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: M. Barnett
› Assessment of Orientation Dependence of Deformation Microstructures in Cold Rolled Duplex Steel: A Study Combining EBSD and Generalized Microstructure Pole Figures
- INVITED - Raul Bolmaro, Instituto de Física Rosario, CONICET-UNR, Bv. 27de febrerro 210 bis, 2000 Rosario
11:10-11:30 (20min)
› Neutron diffraction study of texture and stress evolution in magnesium AZ31 during cycle loading
- Przemysław Kot, CoE NOMATEN, National Institute for Nuclear Research
11:30-11:50 (20min)
› Effect of thermomechanical treatment on fracture toughness of Mg alloys
- Xiaoguang Qiao, Harbin Institute of Technology
11:50-12:10 (20min)
› Crystallographic texture variation in laser beam welded CoCrFeNiMn
- Al-Hamdany Nowfal, Institute of Material and Process Design, Department of Laser Processing and Structural Assessment, Helmholtz-Zentrum Hereon
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: T. Lowe
› Texture evolution during hydrodynamic microparticle penetration: a case of Cu-Cu impact
- INVITED - Ahmed Tiamiyu, University of Calgary
11:10-11:30 (20min)
› Texture formation during thermomechanical processing of biocompatible Mg-Li-Y alloys
- Jan Dittrich, Charles University, Department of Physics of Materials
11:30-11:50 (20min)
› The Relative Importance of Deformation and Phase Transformation on the Macrotexture and Microtexture of Hot Rolled Ti-6Al-4V
- Xiaohan Zeng, School of Natural Sciences, The University of Manchester
11:50-12:10 (20min)
› Dynamic phase transformation driven microstructure and texture development during deformation of Zr-2.5wt.%Nb in α+β phase field
- G Bharat Reddy, Bhabha Atomic Research Centre - Rajeev Kapoor, Bhabha Atomic Research Centre - Apu Sarkar, Bhabha Atomic Research Centre
12:10-12:30 (20min)
11:10 - 12:30 (1h20)
Characterization
Amphi 1 - Fac de Droit
Chair.: A. Godfrey
› 3D investigations of reasons for texture changes during recrystallization
- KEYNOTE - Dorte Juul Jensen, Danmarks Tekniske Universitet = Technical University of Denmark
11:10-11:30 (20min)
› Applications of the new fs-laser capability in tri-beam for large volume microscopy
- Ali Gholinia, Henry Royce Institute and Department of Materials, The University of Manchester, Manchester, M13 9PL, UK
11:30-11:50 (20min)
› Advancing multimodal characterization at the nanoscale with the TESCAN TENSOR analytical 4D-STEM
- Rob Hooley, TESCAN GROUP
11:50-12:10 (20min)
› 3D microstructural investigation of texture development of two-phase titanium alloys
- Conghui Liu, The University of Manchester
12:10-12:30 (20min)
›12:30 (30min)
12:30 - 13:00 (30min)
Time to see Posters and Exhibitions
›13:00 (1h)
13:00 - 14:00 (1h)
Lunch
14:40 - 15:40 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: R. Lebensohn
› Numerical assessment of substructure evolution and kinetics of recrystallization in aluminum alloys
- KEYNOTE - Jurij SIDOR, Savaria Institute of Technology, Faculty of Informatics, ELTE Eötvös Loránd University
14:40-15:00 (20min)
› Analysis of texture and dislocation evolution of pure copper by in situ neutron diffraction and crystal plasticity modeling
- MASATO ITO, Mitsubishi Materials Corporation
15:00-15:20 (20min)
› Evaluation of a clustering algorithm for texture data via viscoplastic self-consistent model
- Alois Ott, Austrian Institute of Technology
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: T. Ungar
› Texture analysis at the neutron strain diffractometer POLDI at PSI
- INVITED - Florencia Malamud, Comisión Nacional de Energía Atómica, Laboratorio Argentino de Haces de Neutrones (LAHN), CONICET, Paul Scherrer Institut
14:40-15:00 (20min)
› Using a high-precison robot for texture and strain determination at Neutron Diffractometer STRESS-SPEC
- Michael Hofmann, Heinz Maier-Leibnitz Zentrum, Technische Universität München
15:00-15:20 (20min)
› POWTEX Neutron Diffractometer at FRM II Garching: Current status and instrument characteristics
- Jens Walter, Geowissenschaftliches Zentrum, Georg-August Universität Göttingen
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: L.S. Toth
› The effect of processing route and parameters on microstructure and texture of ferritic stainless steel
- INVITED - Antti Kaijalainen, Materials and Mechanical Engineering, University of Oulu
14:40-15:00 (20min)
› Investigating the Influence of Temperature and Strain on the Deformation and Cracking Behavior of Y-added Zn-1Al-2.5Mg Extruded Wires
- Khushahal Thool, Sunchon National University
15:00-15:20 (20min)
› CRYSTALLOGRAPHIC TEXTURE EVOLUTION IN THE CRYOGENIC TEMPERATURE- FRICTION STIR PROCESSED AA6XXX ALLOY: EXPERIMENTS AND SIMULATIONS
- Aman Gupta, Sunchon National University
15:20-15:40 (20min)
14:40 - 15:40 (1h)
Characterization
Amphi 1 - Fac de Droit
Chair.: Y. Liu
› Fiber textures revisited
- INVITED - Wolfgang Pantleon, Technical University of Denmark
14:40-15:00 (20min)
› Phase identification and microstructure of CoSn_n intermetallics
- Stefan Martin, TU Bergakademie Freiberg
15:00-15:20 (20min)
› Correlative study of Ni-based superalloys deformation mechanism by in-situ EBSD and HR-DIC
- Zhening Yang, Henry Royce Institute and Department of Materials, The University of Manchester, Manchester, M13 9PL, UK
15:20-15:40 (20min)
›15:40 (30min)
15:40 - 16:10 (30min)
Break
16:10 - 17:10 (1h)
Crystal plasticity and Polycrystal modelling
Amphi Lemoigne
Chair.: R. Schouwenaars
› Mechanistic investigation on Ce addition in tuning recrystallization behavior and mechanical property of Mg alloy
- INVITED - Hucheng Pan, Northeastern University
16:10-16:30 (20min)
› Refining the Identification Methodology for Describing Heterogeneous Fe-Si Materials Using the Viscoplastic Self-Consistent Approach
- Laura Herard, Laboratoire des Sciences des Procédés et des Matériaux
16:30-16:50 (20min)
› Effect of deviation from basal texture on polycristalline simulations of ZnAlMg coatings under multiaxial loading
- Mikel Bengoetxea Aristondo, Centre des Matériaux, CNRS UMR 7633, Evry, BP 87 91003, France
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Symposium Heinz-Günter Brokmeier
Amphi 4 - Fac de Droit
Chair.: T. Ungar
› The ID01 beamline: a strain nanoscope for materials characterisation
- INVITED - Steven Leake, European Synchrotron Radiation Facility [Grenoble]
16:10-16:30 (20min)
› Texturization of α phase in gamma-TiAl alloy by high temperature compression studied by synchrotron radiation diffraction and EBSD
- Weimin Gan, GEMS at MLZ, Helmholtz-Zentrum Hereon, Germany
16:30-16:50 (20min)
› Deformation behavior of Mg-Y-Ni alloys containing LPSO phase during tension and compression through in-situ synchrotron diffraction
- Mingyi ZHENG, Harbin Institute of Technology
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Deformation textures
Amphi 2 - Fac de Droit
Chair.: C. Chen
› Grain Subdivision Behavior Due to Cold Rolling in Ultra-Low Carbon Steel
- INVITED - Tatsuya Morikawa, Kyushu University
16:10-16:30 (20min)
› Orientation dependence of dynamic compared to static recovery in Interstitial Free steel
- Estefania Sepulveda Hernandez, Universiteit Gent = Ghent University, Universidad de Santiago de Chile [Santiago]
16:30-16:50 (20min)
› Texture heterogeneity inside a roll bonded Fe-Al multilaminate subjected to plastic instabilities
- Guillaume Hanon, Institute of Mechanics, Materials and Civil Engineering [Louvain]
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Characterization
Amphi 1 - Fac de Droit
Chair.: D. Juul Jensen
› PyEBSDIndex: A Python module for high precision, and fast indexing of EBSD data
- INVITED - David Rowenhorst, US Naval Research Laboratory
16:10-16:30 (20min)
› New Pattern Matching Workflows for EBSD Data Analysis
- Aimo Winkelmann, AGH University of Science and Technology [Krakow, PL]
16:30-16:50 (20min)
› Exploring The Relative Magnitudes of Diffraction-Based Residual Strain Measurements
- Namit Narasimhan Pai, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay
16:50-17:10 (20min)
|
| Session | Speech | Logistics | Break | Tour |
| Online user: 6 | Privacy |
|
